Full opinion text
OPINION FARNAN, Chief Judge. This action was brought by Plaintiff, LifeScan, Inc. against Defendants, Home Diagnostics, Inc. and MIT Development Corp. alleging that Defendants’ manufacture and sale of the Prestige meter, a device used by diabetic patients to monitor their blood sugar levels, infringes U.S.Patent No. 5,049,487 (“the ’487 Patent”). A nine-day jury trial was held, and the jury returned a verdict finding that (1) both the current version and the earlier version of Defendants’ Prestige meter infringed Claim 1 of the ’487 Patent under the doctrine of equivalents, (2) Defendants induced the infringement of the ’487 Patent and (3) Plaintiff was entitled to damages in the form of a reasonably royalty in the amount of $5,860,940. While the jury found in favor of Plaintiff under the doctrine of equivalents, the jury did not find that either version of Defendants’ Prestige meter literally infringed Claim 1 of the ’487 Patent. Following the jury’s verdict, Defendants filed a Renewed Motion For Judgment As A Matter Of Law (D.I. 442) and a Motion For Partial New Trial (D.I.441). For the reasons set forth below, Defendants’ Motion For Judgment As A Matter Of Law will be granted on the issue of infringement and denied on the issue of validity, and Defendants’ Motion For A New Trial will be denied. STANDARD OF REVIEW I. Motion For Judgment As A Matter Of Law To prevail on a renewed motion for judgment as a matter of law following a jury trial, the moving party “ ‘must show that the jury’s findings, presumed or express are not supported by substantial evidence or, if they were, that the legal conclusions implied [by] the jury’s verdict cannot in law be supported by those findings.’ ” Pannu v. Iolab Corp., 155 F.3d 1344, 1348 (Fed.Cir.1998) (quoting Perkin-Elmer Corp. v. Computervision Corp., 732 F.2d 888, 893 (Fed.Cir.1984)); accord Price v. Delaware Department of Correction, 40 F.Supp.2d 544, 549 (D.Del.1999). In assessing the sufficiency of the evidence, the court must give the non-moving party, “as [the] verdict winner, the benefit of all logical inferences that could be drawn from the evidence presented, resolve all conflicts in the evidence in his favor, and in general, view the record in the light most favorable to him.” Williamson v. Consolidated Rail Corp., 926 F.2d 1344, 1348 (3d Cir.), reh’g en banc denied, 1991 U.SApp. LEXIS 16758, 1991 WL 228122 (3d Cir.1991); Perkim-Elmer Corp., 732 F.2d at 893. The court may not evaluate the credibility of the witnesses, may not weigh the evidence, and may not substitute its view of the evidence for the jury’s view. Price, 40 F.Supp.2d at 550 (holding that judgment as a matter of law may not be granted where jury’s view of evidence differs with that manifested in jury’s verdict, because such action would usurp jury’s role as factfinder). Rather, the court must determine whether the evidence reasonably supports the jury’s verdict. See Dawn Equip. Co. v. Kentucky Farms, Inc., 140 F.3d 1009, 1014 (Fed.Cir.1998); Gomez v. Alleghany Health Servs. Inc., 71 F.3d 1079, 1083 (3d Cir.1995) (describing standard as “whether there is evidence upon which a reasonably jury could properly have found its verdict”); 9A Charles A. Wright & Arthur R. Miller, Federal Practice & Procedure § 2524 at 249-266 (3d ed. 1995) (“The question is not whether there is literally no evidence supporting the party against whom the motion is directed, but whether there is evidence upon which the jury properly could find a verdict for that party.”) II. Motion For A New Trial In pertinent part, Federal Rule of Civil Procedure 59(a) provides: A new trial may be granted to all or any of the parties and on all or part of the issues in an action in which there has been a trial by jury, for any of the reasons for which new trials have heretofore been granted in actions at law in the courts of the United States. Fed.R.Civ.P. 59(a). Among the most common reasons for granting a new trial are the following: (1) the jury’s verdict is against the clear weight of the evidence, and a new trial must be granted to prevent a miscarriage of justice; (2) newly discovered evidence exists that would likely alter the outcome of the trial; (3) improper conduct by an attorney or the court unfairly influenced the verdict; or (4) the jury’s verdict was facially inconsistent. Zarow-Smith v. New Jersey Transit Rail Operations, 953 F.Supp. 581, 584 (D.N.J.1997) (citations omitted). The decision to grant or deny a new trial is committed to the sound discretion of the district court. Allied Chemical Corp. v. Daiflon, Inc., 449 U.S. 33, 36, 101 S.Ct. 188, 66 L.Ed.2d 193 (1980); Olefins Trading, Inc. v. Han Yang Chem Corp., 9 F.3d 282 (1993) (reviewing district court’s grant or denial of new trial motion under deferential “abuse of discretion” standard). However, where the ground for a new trial is that the jury’s verdict was against the great weight of the evidence, the court should proceed cautiously, because such a ruling would necessarily substitute the court’s judgment for that of the jury. Klein v. Hollings, 992 F.2d 1285, 1290 (3d Cir.1993). Although the standard for grant of a new trial is less rigorous than the standard for grant of judgment as a matter of law in that the court need not view the evidence in the light most favorable to the verdict winner, a new trial should only be granted where “a miscarriage of justice would result if the verdict were to stand,” the verdict “cries out to be overturned,” or where the verdict “shocks our conscience.” Williamson, 926 F.2d at 1352; see also Price, 40 F.Supp.2d at 550. DISCUSSION I. Defendants’ Motion For Judgment As A Matter Of Law On The Issue Of Infringement In support of their Motion For Judgment As A Matter Of Law on the issue of infringement, Defendants raise four arguments. First, Defendants contend that prosecution history estoppel precludes the scope of equivalence that the jury found by virtue of its verdict that the Prestige glucose meters infringed Claim 1 of the ’487 Patent under the doctrine of equivalents. Second, Defendants contend that substantial evidence does not support the jury’s finding of equivalence. Third, Defendants contend that Plaintiffs admissions limit the scope of its patent claims to in-meter application testing. Lastly, assuming the ’487 Patent is limited to in-meter testing, Defendants contend that substantial evidence does not support a finding that out-of-meter application testing is the equivalent of in-meter application testing. A. Whether Prosecution History Es-toppel Precludes the Scope of Equivalence Found by the Jury In arguing that prosecution history es-toppel precludes the scope of equivalence found by the jury in this case, Defendants contend that (1) Plaintiffs amendments to Claim 11 of the original ’487 patent and (2) Plaintiffs arguments to the PTO during the prosecution of the ’487 Patent demonstrate that Plaintiff limited its claims to a time-specific method. Stated another way, Defendants’ contend that the method described in the ’487 Patent of causing an analytical measurement to be made is limited to a specific amount of time, i.e. a fixed number of seconds. In response to Defendants’ argument, Plaintiff contends that Claim 1 of the ’487 Patent is not limited to a time-specific method. Specifically, Plaintiff contends that the amendments it made to the ’487 patent were not made to overcome prior art, and Plaintiff did not, by argument or amendment, narrow its claims to surrender coverage for “non-specific time methods” of taking analytical measurements. 1. Applicable law The doctrine of prosecution history estoppel limits infringement by otherwise equivalent products or processes. Typically, prosecution history estoppel arises in one of two ways: (1) a change in the scope of a claim is made to overcome an examiner’s rejection based on prior art; Pall, 66 F.3d at 1218; or (2) even without a rejection based on prior art, an applicant unmistakably and clearly disavows claim coverage during the prosecution of a patent in an effort to obtain the patent. Southwall Technologies, Inc. v. Cardinal IG Co., 54 F.3d 1570, 1580 (Fed.Cir.), cert. denied, 516 U.S. 987, 116 S.Ct. 515, 133 L.Ed.2d 424 (1995). Thus, prosecution history estoppel bars a patentee from recapturing through the doctrine of equivalence subject matter which was surrendered by either argument or amendment during the prosecution of the patent. Insituform Techs. Inc. v. Cat Contracting, Inc., 99 F.3d 1098, 1107 (Fed.Cir.1996). Whether the doctrine of prosecution history estoppel applies in a given case is a question of law. Genentech, Inc. v. Wellcome Foundation Ltd., 29 F.3d 1555, n. 35 (Fed.Cir.1994). A rebuttable presumption that prosecution history estoppel applies arises whenever an amendment to a claim is made, but the reasons for the amendment are not shown by the patentee. Loral Fairchild, 181 F.3d 1313, 1322 (citing Warner-Jenkinson, 520 U.S. at 33, 117 S.Ct. 1040). As the Supreme Court explained in Warner-Jenkinson: [T]he burden [is] on the patentholder to establish the reason for an amendment required during prosecution. The court then would decide whether that reason is sufficient to overcome prosecution history estoppel as a bar to application of the doctrine of equivalents to the element added by that amendment. Where no explanation is established, however, the court should presume that the PTO had a substantial reason related to patentability for including the limiting element added by amendment. In those circumstances, prosecution history estoppel would bar the application of the doctrine [sic, of] equivalents. 520 U.S. at 33, 117 S.Ct. 1040. In determining whether prosecution history estoppel applies in the context of an amendment to a patent, the court should consider the reason for the patent examiner’s objection and the manner in which the amendment addressed and avoided the objection. Not all amendments give rise to a claim of prosecution history estoppel. “Amendments may be of different types and may serve different functions.” Hughes Aircraft Co. v. United States, 717 F.2d 1351, 1363 (Fed.Cir.1983). Similarly, there may be a variety of reasons why a patent examiner may request a change in claim language. Warner-Jenkinson, 520 U.S. at 31, 117 S.Ct. 1040. As the United States Supreme Court has explained: If the PTO has been requesting changes in claim language without the intent to limit equivalents, or indeed, with the expectation that language it required would in many cases allow for a range of equivalents, we should be extremely reluctant to upset the basic assumptions of the PTO without substantial reason for doing so. Our prior cases have consistently applied prosecution history estop-pel only where claims have been amended for a limited set of reasons, and we see no substantial cause for requiring a more rigid rule invoking an estoppel regardless of the reasons for a change. Id. at 31-32, 117 S.Ct. 1040 (footnote omitted). In determining whether a patentee’s arguments during the prosecution of the patent give rise to prosecution history estoppel, the court must determine whether the patentee’s arguments amounted to an unequivocal and unmistakable disavowal of the claim coverage in order to obtain the patent. In this type of estoppel, the Court of Appeals for the Federal Circuit has explained: While it is true that a patentee’s unmistakable assertions to the PTO in support of patentability, whether or not they were truly required to secure allowance of the claim, will estop the patentee from obtaining protection of the subject matter surrendered thereby, ... it is difficult to conclude, in light of the truly equivocal nature of the claim [at issue] and the conflicting evidence in the prosecution history, that [the patentee] surrendered protection ... with the clarity that prosecution history estoppel requires. Athletic Alternatives v. Prince Manufacturing, 73 F.3d 1573, 1582 (Fed.Cir.1996). If a patentee relinquishes claim coverage by argument or amendment during the prosecution of the patent, the court must determine what subject matter was relinquished. This inquiry is an objective one, which is measured from the vantage point of what a competitor was reasonably entitled to conclude, from the prosecution history, that the applicant gave up to procure issuance of the patent. Harmon, Patents and the Federal Circuit § 6.3(b) at 296 (4th ed.1997). 2. The prosecution of the ’487 Patent Claim 11 of Plaintiffs original patent application ultimately issued as Claim 1 of the ’487 Patent. Originally, Claim 11 provided: A method of initiating timing of a measurement in a reflectance-reading device, which comprises: taking at least one first reflectance reading from a dry first surface of a porous matrix prior to application of a sample to a second surface of said matrix; taking at least one additional reflectance reading from said first surface; comparing said additional reflectance reading to said first reflectance reading and initiating time measurement upon a predetermined drop in reflectance resulting from said sample reaching said first surface; and taking at least one measurement reflectance reading at a predetermined time after said additional reflectance reading differs from said reflectance value by said predetermined difference. In the First Office Action dated November 16, 1989, the Examiner rejected Claim 11 on three grounds: (1) under 35 U.S.C. § 112 as indefinite “for failing to particularly point out and distinctly claim the subject matter which applicant regards as the invention” (PX-334 at 61); (2) under 35 U.S.C. § 102(b) as anticipated by, or in the alternative, under 35 U.S.C. § 103 as obvious over prior art known as the Jessop Patent (PX-334 at 63); and (3) under 35 U.S.C. § 102(b) as anticipated by, or in the alternative under 35 U.S.C. § 103 as obvious over prior art known as the Sodickson Patent (PX-334 at 64). On April 16, 1990, in response to the Examiner’s rejection of Claim 11, Plaintiff amended the claim as follows: 11. (Amended) A method of [initiating timing of a measurement] causing an analytical measurement to be made in a reflectance-reading device at the end of a predetermined time period after an analyte reacts with reagent in a porous, reflectance-reading matrix located in said device, which comprises: taking [at least one] a first reflectance reading from a dry first surface of [a] said porous matrix prior to application of a liquid sample suspected of containing said analyte to a second surface of said matrix from which said sample can travel to said first surface by capillary action; taking [at least one] an additional reflectance reading from said first surface after said sample is applied to said porous matrix; comparing said additional reflectance reading to said first reflectance reading and initiating said predetermined time period [time measurement] upon a predetermined drop in reflectance resulting from said sample reaching said first surface; and taking [at least one] a measurement reflectance reading at the end of [a] said predetermined time period [after said additional reflectance reading differs from said reflectance value by said predetermined difference]. (PX-334 at 77-78, additions denoted by underlining, deletions by brackets). In the Second Office Action dated July 20, 1990, the Examiner again rejected Claim 11 on the grounds of indefiniteness and obviousness over the Jessop Patent. In response to the Examiner’s second rejection of Claim 11, Plaintiff amended the claim as follows: 11. (Twice Amended) A method of causing an analytical measurement to be made in a reflectance-reading device at the end of a predetermined time period after an analyte reacts with reagent in a porous, reflectance-reading matrix located in said device, which comprises: taking a first reflectance reading from a dry first surface of said porous matrix prior to application of a liquid sample suspected of containing said analyte to a second surface of said matrix from which said sample can travel to said first surface by capillary action and react with said reagent in said matrix if said analyte is present in said sample; taking an additional reflectance reading from said first surface after said sample is applied to said porous matrix; comparing said additional reflectance reading to said first reflectance; [and] initiating said predetermined time period upon a predetermined drop in reflectance [resulting from] sufficient to indicate that said sample [reaching] has reached said first surface; and taking a measurement reflectance reading at the end of said predetermined time period without having determined the time at which said sample was initially applied to said porous matrix. 3. Application of the law of prosecution history estoppel to the prosecution of the ’487 Patent Applying the law of prosecution history estoppel to the prosecution of the ’487 Patent, the Court must, as a threshold matter, determine whether the rebuttable presumption that the amendments were made for reasons related to patentability applies in light of Plaintiffs amendments to the ’487 Patent. The prosecution history of the ’487 patent indicates that the patentholder provided an explanation for the amendments to the claims during the prosecution of the ’487 patent. (PX-334 at 78-85, 97-102). Accordingly, the Court concludes that the Wamer-Jenkinson rebuttable presumption is inapplicable. Nevertheless, the Court must consider the reasons for Plaintiffs amendments and what, if any, coverage that Plaintiff surrendered as a result of the amendments. Stated another way, the Court’s specific inquiry in this case is whether Plaintiff amended the patent to overcome the prior art, and if so, whether Plaintiff surrendered coverage for “non-specific time methods” by its amendments. Harmon, supra at § 6.3(b) at 301 (“The fact that claims were surrendered does not always mean that the doctrine of prosecution history estoppel completely prohibits a patent from recapturing some of what was originally claimed. When claim changes or arguments are made in order to more particularly point out the invention, the purpose is to impart precision, not to overcome prior art”) After reviewing the prosecution history of the ’487 Patent as a whole, the Court concludes that Plaintiffs amendments were not made to overcome the prior art, and even if the amendments were in some way responsive to the prior art, the amendments and arguments made during the prosecution of the ’487 Patent did not surrender coverage for “non-specific time methods.” Although the Examiner rejected Claim 11 in light of prior art, i.e. the Jessop and Sodickson Patents, the Examiner also rejected Claim 11 on indefiniteness grounds. Elaborating on the rejection of Claim 11 for indefiniteness in the First Office Action, the Examiner stated: Claim 11 fails to recite clear, distinct and positive process steps. If claim 11 is directed to a method of “initiating timing” (line 1), then the step of taking additional measurements after such initiation is superfluous and should be deleted (lines 15-18). Claim 11 does not clearly recite the structural relationship of the “first” and “second surfaces.” Claim 11 does not positively recite application of sample. It is suggested that “at least one” be written as — a—in claim 11, line 4 because any reflectance reading taken beyond the “first” one is by definition an “additional” reading. (PX-334 at 61-62). Examining the substance of the first series of amendments in light of the Examiner’s indefiniteness objection, the Court concludes that the amendments made to the ’487 Patent go directly to the concerns raised by the Examiner’s indefiniteness rejection. For example, the pat-entee amended the patent from a method of “initiating timing of a measurement” to a method of “causing an analytical measurement to be made” in order to more accurately state the invention and obviate the Examiner’s concern that subsequent measurements would be superfluous if the invention were only directed at a method of initiating timing. Likewise, the paten-tee added language to more specifically recite the structural relationship of the “first” and “second surfaces” and to positively recite application of the sample. For example, the patentee added language to describe application of the “liquid” sample to a “porous matrix” and emphasized that this sample would “travel” between the “porous” first and second surfaces “by capillary action.” In addition, the patentee heeded the examiner’s suggestion of deleting “at least one” and replacing it with “a” in the patent’s discussion of talcing reflectance readings. With regard to the Examiner’s prior art rejections, the Court further concludes that the Examiner’s rejections in the First Office Action were not directed to the nature of the timing period. For example, in discussing the Jessop Patent, the Examiner stated that Jessop measures the reflectance of an analytical slide (i.e. porous matrix) both before and after liquid sample is applied to the slide. The difference in reflectance between the “dry” and “wet” readings, respectively, is compared to determine if the slide contains sufficient sample for a suitable test result, i.e. if analysis measurements may be initiated. (PX-334 at 63-63). The Examiner further explained that “[a]t least one addition [sic] reflectance measurement for analysis purposes is inherent in Jessop.” In the alternative, the Examiner stated that: it would have been obvious [under Jes-sop] to initiate measurement readings as claimed after the sample had reached the reactants on said analytical slide. Not only is sample presence easily detected but inherent differences in the reflectance characteristics, i.e. background, of each slide is corrected for. Dye precursor comprising slides are conventional. (PX-334 at 64). Similarly in discussing Sodickson, the Examiner explained that Sodickson teaches the taking of “reflectance readings at a reaction site (i.e. first surface) before and after sample migration therethrough. This allows the ‘before’ or first reading to serve as a blank to produce a reference signal for the analytical measurement.” The Examiner found that “[a]dditional measurements comprising the second (sample present) and at least one additional (Le.endpoint) reading” and “conventional reagent matrices, e.g. containing dye precursor” were inherent in Sodickson. In addition, the Examiner stated that it would have been obvious under Sodickson “to obtain a pre-sample reflectance reading to serve as a reagent blank to correct for non-uniform reagent ... distribution” and “to determine reaction reflectance from sample contact with reagents through linear reaction.” (PX-334 at 65). Thus, after reviewing the Examiner’s remarks, the Court finds that the Examiner’s concerns were based on such issues as the claimed inventions’ use of the change in reflectance due to wetting to automatically start the incubation period, the number of measurements to be taken and the use of matrices containing dye precursors. Because the Court finds that the Examiner’s prior art rejections were not concerned with time periods, the Court concludes that the amendments, insofar as they related to the predetermined time period, were not made to overcome the prior art. Defendants direct the Court to the Second Office Action in which the Examiner again rejected Claim 11 in light of the Jessop patent and stated that “one of ordinary skill would have expected the analyzer’s computer program to have specific parameters/instructions as to incubation times and measurement times appropriate to the selected test slide.” (PX-334 at 90). While the Examiner does touch on time periods in the Second Office Action, it appears to the Court that taken in its totality, the thrust of the Examiner’s objection is concerned with the use of the change in reflectance to initiate events. The Examiner explained that Jessop teaches “measuring an initial change in reflectance, i.e. wet (with liquid sample) versus dry (without liquid sample) readings, to determine if the slide contains sufficient liquid sample suitable for a test.” The Examiner then stated that the applicant contends that Jessop does not suggest using this initial change in reflectance to automatically cause another reflectance measurement to be taken at a specific time thereafter. It is in response to the applicant’s contention concerning the initial change in reflectance that the Examiner mentions time periods. According to the Examiner: Jessop as a whole ... does suggest using this initial change in reflectance to automatically cause further events to occur at specified, preprogrammed times thereafter (depending upon the test analyte being determined). (PX-334 at 89, emphasis added). The Examiner then goes on to enumerate the events which occur, such as applying liquid to the test slide, analyzing the slide’s change in reflectance, and taking the measurement; however, it appears to the Court that these additional comments are by way of further explanation and are not the Examiner’s primary focus. To the extent that the Examiner’s remarks can be construed to raise the time period issue, the Court concludes that the amendments which were made in response to the Examiner’s rejection were not made to overcome the prior art insofar as specified time periods are concerned. Two of the three amendments had nothing to do with time periods and were directed at (1) positively reciting the possibility of reaction of reagent with analyte if the analyte were present, and (2) clarifying the language related to a predetermined drop in reflectance to indicate that the drop must be of sufficient quantity to indicate that the sample has reached the first surface. The only amendment which deals in any way with time is the language which specifies that the measurement reflectance reading which is taken does not depend on determining the time at which the sample was initially applied to the porous matrix. The Court does not read this amendment to surrender coverage for non-specific times. Rather, it appears to the Court that this amendment emphasizes that Plaintiffs invention is not time-dependent. Moreover, the Court concludes that Plaintiffs arguments during the prosecution of the ’487 Patent did not surrender nonspecific time methods. To the contrary, Plaintiffs arguments illustrate that a specific time period, fixed in length, was not a requirement of the ’487 Patent. For example, in distinguishing the prior art of Jessop and Sodickson, Plaintiff pointed out: Applicant’s invention does not reside in the fact that a measurement is made at a specific time after sample is applied to the reagent pad; rather the invention is related to how one determines the time at which measurement will be made.... Nothing in either Sondickson [sic] or the Jessop patent points in the direction of using the initial reflectance change to determine the incubation period before making the reflectance reading that determines the amount of analyte present in the sample. (PX-334 at 83, italicized emphasis added, underlined emphasis in original). Similarly, in discussing the change from “at least one” reflectance measurement to “a” reflectance measurement, Plaintiff expressly stated that multiple readings are covered by the claims of the Patent. As Plaintiff explained: Additionally, Applicant has changed the language discussing “at least one” reflectance measurement to read “a” reflectance measurement. However applicant would like to make clear that multiple readings are in fact common and are still covered by the claims. While it is true that any reflectance reading taken beyond the first one is, by definition, an additional reflectance reading so that the present claims read on both single and multiple first and second reflectance readings, in practice these readings are taken automatically at short intervals so that multiple readings are typically taken both before and after the sample is applied to the dry matrix. The record should therefore be clear that this meaning is understood by both applicant and Examiner. (PX 334 at 81, Tr. at 688:23-692:5, emphasis added). Because multiple readings were contemplated by the ’487 Patent and Plaintiffs argument to the Patent Examiner expressly referred to the possibility of multiple readings, the Court concludes that Plaintiffs contemplated, rather than surrendered, a non-time specific method. Defendants direct the Court to statements made by the Plaintiff during the prosecution history to the effect that reflectance measurements are made at “specific times” after the sample reacts with reagent to support its argument that the method claimed in the ’487 Patent is time specific. However, the Court concludes that taken in context, Plaintiffs statements do not suggest that the ’487 Patent is limited to a time-specific method. For example, Plaintiff does refer to a reflectance measurement being made at a “specific time after the plasma reaches the area from which the measurement will be taken” (PX-334 at 80); however, Plaintiff also emphasizes earlier in the same amendment that “it if often important for the measurement to be made at a specific time (or at least within a specific range of times) after sample has reacted with reagent in the pad.” (PX 334 at 78-80 (emphasis added); Tr. at 688:1-22). That Plaintiff contemplated a range of times illustrates that Plaintiff did not surrender non-specific time methods in favor of a specified amount of time. Defendants also rely on the ’487 Patent’s use of the phrase “predetermined time period” to support its contention that the ’487 Patent is limited to time specific methods. After reviewing the prosecution history of the ’487 Patent, the Court finds insufficient evidence exists to support Defendants’ interpretation of the phrase “predetermined time period.” Plaintiff did not at any time during the prosecution of the ’487 Patent argue that the “predetermined time period” was required to be a fixed or specific length of time. Rather, Plaintiff emphasized that the primary feature of its invention was its time-independent nature. For example, Plaintiff stated that a “key aspect of the present invention is that the timing period is independent of the time at which sample is applied to the matrix.” (PX-334 at 100-102). Moreover, the Court observes that Defendants’ interpretation of the phrase “predetermined time period” would be inconsistent with the specification of the ’487 Patent, which expressly contemplates multiple reflectance readings at a number of unspecified times after the predetermined drop in reflectance has been detected and the incubation starts, depending on the sample and the level of glucose in the sample. For example, the specification of the ’487 Patent provides: The liquid sample penetrates the matrix, resulting in an initial change in reflectance at the measurement surface. A reading is then taken at one or more times after the initial change in reflectance to relate the further change in reflectance at the measurement surface or in the matrix as a result of formation of the reaction product to the amount of analyte in the sample. (PX-137 at col. 3:37-44 (emphasis added)). That the claimed method is not limited to a single, fixed time period is further emphasized in the specification’s reference to a “measuring time span” which varies according to the level of glucose concentration in the test sample. As the specification and disclosed embodiments indicate, longer reaction times may result for samples having high glucose concentrations than for samples with low glucose concentrations, and as such, the length of time between the detection of the predetermined drop in reflectance and the subsequent reflectance measurement is not limited to a fixed number of seconds. For example, the specification states: The 635 nm of LED is powered only during a brief measuring time span that begins approximately 20 seconds after the start time as indicated by reflectance switching. If this reading indicates that a high level of glucose is present in the sample, a 30-second reading is taken and used in the final calculation in order to improve accuracy. Typically, high levels are considered to begin at about 250 mg/dl. (PX-137 at col. 12:39-47). Similarly, one disclosed embodiment contemplates readings taken at multiple periods, varying in length, depending on the concentration of glucose in the sample: Results are typically displayed at approximately 30 seconds after blood application when a blood glucose sample is being measured, although a 20 second reaction is permissible for glucose samples having a concentration of glucose of less than 250 mg/dl. If other samples are being measured, suitable times for displaying the result may differ and can be readily determined from the characteristics of the reagent/sample selected. (PX-137 at col. 13:15-23 (emphasis added)). In sum, the Court concludes that the record does not support Defendants’ interpretation of “predetermined time” to mean a “specific” or “fixed amount of time.” The Court’s conclusion in this regard is consistent with its claim interpretation that “predetermined time” should be literally construed “as a time period determined in advance.” (D.I. 423 at 5). Because Defendants’ theory of prosecution history estoppel, i.e. that Plaintiff surrendered non-specific time methods, is inconsistent with the prosecution history of the patent, the specification of the patent and the disclosed embodiments of the patent, the Court concludes that Defendants are not entitled to judgment as a matter of law on the issue of prosecution history estop-pel. B. Whether Substantial Evidence Supports The Jury’s Finding That The Prestige Meters Infringe Claim 1 of the %87 Patent Under The Doctrine Of Equivalents Defendants next contend that the jury’s finding that the Prestige meters infringe Claim 1 of the ’487 Patent is not supported by substantial evidence. Specifically, Defendants argue that Plaintiff did not provide substantial evidence that (1) the Prestige meter performs in accordance with the predetermined time period and initiating steps required by Claim 1 (D.I. 447 at 17), and (2) the Prestige meter’s out-of-meter testing infringes Claim 1. The Court will examine each of Defendants’ arguments in turn. 1. Applicable law An accused product that does not literally infringe upon the express terms of the patent may nonetheless be found to infringe if there is equivalence between the elements of the accused product and the claimed elements of the patented invention. See generally Wamer-Jenkinson, 520 U.S. 17,117 S.Ct. 1040,137 L.Ed.2d 146 (1997). For there to be infringement under the doctrine of equivalents, the accused product or process must embody every element of a claim, either literally or by an equivalent. Id. at 41, 117 S.Ct. 1040. Thus, the mere showing that an accused device is equivalent overall to the claimed invention is insufficient to establish infringement under the doctrine of equivalents. The primary inquiry in applying the doctrine of equivalents is whether “the differences between the claimed invention and the accused device are ... ‘insubstantial.’ ” Dawn Equip. Co. v. Kentucky Farms, Inc., 140 F.3d 1009, 1014 (Fed.Cir.1998). The determination of whether the differences between the claimed invention and the accused device are insubstantial involves the question of whether “the element of the accused device at issue performs substantially the same function in substantially the same way, to achieve substantially the same result, as the limitation at issue in the claim.” Id. at 1016 (describing the “function/way/result” inquiry). To this effect, the United States Supreme Court has emphasized that the “particular linguistic framework used” is not important, so long as it addresses the “essential inquiry [of whether] the accused product or process contain[s] elements identical to or equivalent to each claimed element of the patented invention.” Wamer-Jenkinson, 520 U.S. at 40, 117 S.Ct. 1040. The Court emphasized that “[t]he determination of equivalence should be applied as an objective inquiry on an element-by element basis.” Id. As a matter of policy, the purpose of the doctrine of equivalents is to prevent a device from being copied with minor changes and substitutions which would add nothing to the invention, but would be enough to take the copied device outside the precise language of a claim. See Graver Tank & Mfg. Co. v. Linde Air Prods., Co., 339 U.S. 605, 607, 70 S.Ct. 854, 94 L.Ed. 1097 (1950). However, a broad application of this policy may conflict with the statutory requirement that a patentee distinctly claim the invention covered by a patent. Warner-Jenkinson, 520 U.S. at 29, 117 S.Ct. 1040; see also 35 U.S.C. § 112. To temper this potential conflict and prevent the doctrine from expanding a patent’s protection beyond the scope of its claims, the Federal Circuit has cautioned that application of the doctrine of equivalents should be “the exception ... [and] not the rule” in patent infringement actions. London v. Carson Pine Scott & Co., 946 F.2d 1534, 1538 (Fed.Cir.1991). The question of equivalence may be decided by a jury. However, the Federal Circuit has recognized that the doctrine of equivalents, though simple to articulate, is conceptually difficult to apply. To reduce the risk of jury confusion over the doctrine, the patentee must present “particularized testimony and linking argument” as to why the function, way and result of each element in the accused devise is substantially the same as the elements of the claimed invention. Generalized testimony concerning the similarities between the claims and the accused device and evidence or argument subsumed in a plaintiffs case of literal infringement are insufficient to establish infringement under the doctrine of equivalents. Rather, a plaintiff must “articulate the comparison” between the claimed elements and the elements of the accused device and present “substantial evidence” comparing the claimed elements and the accused device in each of the three aspects of equivalency, i.e. the function, way, and result inquiry. See Malta v. Schulmerich Carillons, Inc., 952 F.2d 1320, 1329 (Fed.Cir.1991); Lear Siegler v. Sealy Mattress Co. of Mich., 873 F.2d 1422, 1427 (Fed.Cir.1989). 2. Whether the Prestige meters perform in accordance with the predetermined time period step required by Claim 1 of the ’487 Patent The fifth element, also known as step (e) or element (e), recited in Claim 1 of the ’487 Patent is “initiating said predetermined time period upon a predetermined drop in reflectance sufficient to indicate that said sample has reached said first surface.” In arguing that insufficient evidence supports the jury’s finding that the Prestige meters include the equivalent of a predetermined time period as set forth in this step, Defendants contend that (1) Plaintiff failed to provide “particularized testimony” and “linking argument” to support an equivalents finding; (2) the jury’s finding of infringement removes the predetermined time period limitation from the claim; and (3) the Prestige meters do not operate in accordance with the “role” of the predetermined time period. In response to Defendants’ argument, Plaintiff contends that sufficient evidence was presented from which the jury could have found that step (e) was present, either literally or under the doctrine of equivalents. Because the jury was not required to specify which elements it found literally present and which elements were found equivalently present, Plaintiff further contends that if sufficient evidence existed for the jury to find this element was literally present in the Prestige meters, then the Court need not reach the issue of whether sufficient evidence existed for the jury to find that this element was equivalently present in the Prestige meters. See Comark Communications, Inc., 156 F.3d at 1188-89 (Fed.Cir.1998) (holding that where jury did not indicate which elements were met literally and which were met equivalently, and substantial evidence existed from which the jury could have found the limitation literally, court need not find substantial evidence and linking testimony of equivalents with respect to that limitation). The Court will examine the parties’ arguments in turn. a. Whether step (e) is literally present in the Prestige meters After reviewing the evidence presented on the question of literal infringement as it relates to step (e), the Court acknowledges that the question of whether substantial evidence supports a finding that step (e) was met literally in the Prestige meters is a “close call.” Nevertheless, after review of the testimony, the Court concludes, as a matter of law, that insufficient evidence was presented from which the jury could have concluded that step (e) was literally present in the Prestige meters. Although both of Plaintiffs liability experts, Dr. Smith and Mr. Kramer, testified about the operation of the Prestige meter, the Court finds their testimony to be conclusory and unclear on the issue of a predetermined time period. For example, both experts testified that the Prestige meter operates using five second intervals and that this is a predetermined time period; however, neither expert provided a thorough explanation of his opinion which integrated the precise claim language, the Court’s interpretation of that language and the operation of the Prestige meter. Further, Mr. Kramer’s testimony undercut in some respects his opinion that the Prestige meter operates according to a predetermined time period. For example, Mr. Kramer testified: Q: And you agree that it is not known before the test begins with the Prestige device at which of these five second intervals the result will be displayed, correct? A: Are we still talking about the 070 version? Q: In either one. A: Either one? It is correct that the readings will be taken every five seconds, and we cannot determine which of those five seconds will produce the result that will be displayed to the user. (Tr. 950:7-18). To this extent, Mr. Kramer’s testimony suggested that the Prestige meter does not use a time period determined in advance. Given the conclusory and contradictory nature of the testimony of Plaintiffs experts, the Court cannot conclude that sufficient evidence was presented to support a conclusion that step (e) literally reads on the Prestige meter. Accordingly, the Court concludes that insufficient evidence was presented, as a matter of law, to support a conclusion that step (e) is literally present in the Prestige meter. b. Whether the equivalent of step (e) is present in the Prestige meters If insufficient evidence exists to support the conclusion that step (e) is literally present in the Prestige meters, then the jury’s verdict can only be supported if Plaintiff met its burden under the doctrine of equivalents of presenting particularized testimony and linking argument as to why the function, way and result of the Prestige meter’s operation is substantially the same as that claimed in element (e) of the ’487 Patent. After reviewing the testimony of Plaintiffs experts and the argument presented by counsel, the Court concludes that Plaintiff failed, as a matter of law, to present the particularized testimony and linking argument required to support a verdict of infringement under the doctrine of equivalents. Mr. Kramer’s testimony on equivalents is particularly vague in that he appears to rely on the language of the ’487 Patent for his conclusion that the Prestige meter operates in the same manner as the ’487 Patent, without explicitly explaining how the function, way and result of step (e) is present in the device. Indeed, Dr. Smith’s testimony is even more vague than Mr. Kramer’s testimony. In fact, Dr. Smith never articulates a function, way, result analysis with respect to step (e). (Tr. 725-730). Lastly, in evaluating the closing argument of Plaintiffs counsel, the Court finds that Plaintiffs argument regarding the doctrine of equivalents as it pertains to step (e) is subsumed within his argument for literal infringement. For example, Plaintiffs counsel sets forth an equivalence argument which is separate and distinct from his arguments concerning literal infringement for the step requiring a dry-first reflectance reading in the out-of-meter use of the Prestige meter (Tr. 2592:3-2593:7). However, with regard to step (e), Plaintiffs counsel does not raise a separate and distinct equivalence argument. (Tr. 2602-2606). Accordingly, the Court concludes, as a matter of law, that insufficient evidence exists to support a conclusion that step (e) is present equivalently in the Prestige meters. c. Summary Because the Court finds that insufficient evidence exists to support a conclusion that step (e) is either literally present or present by equivalents in the Prestige meter, the Court concludes that insufficient evidence exists to support the jury’s verdict that the Prestige meters infringe Claim 1 of the ’487 Patent under the doctrine of equivalence. Accordingly, Defendants’ Motion For Judgment As A Matter Of Law will be granted on this issue. 3. Whether substantial evidence supports the jury’s verdict that out-of-meter testing infringes Claim 1 of the ’487 Patent under the doctrine of equivalents In arguing that substantial evidence does not support the jury’s verdict that the out-of-meter application use of the Prestige meter infringes Claim 1 of the ’487 Patent under the doctrine of equivalents, Defendants contend that (1) the Court erred in its claim construction that the term “porous reflectance-reading matrix located in said [reflectance-reading] device” did not require the porous matrix to be in the meter when the sample is applied; (2) the dry reflectance reading step of Claim 1 is not literally or equivalently present with out-of-meter use; (3) out-of-meter application use of the Prestige meter does not perform the applying step of Claim 1; and (4) out-of-meter application use of the Prestige meter does not perform the “properly construed” initiating step of Claim 1. The initiating step is part and parcel of element (e), which the Court has previously concluded is not met in the Prestige meters either literally or under the doctrine of equivalents. Accordingly, the Court concludes that substantial evidence does not support the jury’s verdict that the out-of-meter testing use of the Prestige meter infringes Claim 1 of the ’487 Patent under the doctrine of equivalents. However, in order to provide a complete analysis of those issues raised in the context of evaluating whether substantial evidence supports the jury’s verdict of infringement under the doctrine of equivalence, the Court will address below the remaining arguments raised by Defendants. a. The Court’s Claim Construction Following extensive Markman briefing by both parties and a lengthy Markman hearing, the Court concluded that the term “porous, reflectance-reading matrix located in said [reflectance-reading] device” does not require that the porous matrix be in the meter when the sample is applied. In reaching this conclusion, the Court declined to read limitations from the preferred embodiment or specification into the claims of the patent. (D.I.423). To the extent that Defendants challenge the Court’s claim construction, the Court rejects Defendants’ argument. A motion for judgment as a matter of law is not the proper vehicle in which to seek reargument of the Court’s claim construction. Moreover, reargument is only appropriate in three circumstances: (1) where the court has patently misunderstood a party, (2) where the court has made an error not of reasoning, but of apprehension, or (3) where the court has made a decision outside the scope of the issues presented to the court by the parties. Pirelli Cable Corp. v. Ciena Corp., 988 F.Supp. 424, 445 (D.Del.1997) (citations omitted). Defendants have not alleged any of these circumstances and simply contend that the Court’s claim construction is legally incorrect. Accordingly, the Court declines to revisit its claim construction rulings and rejects Defendants’ argument that substantial evidence does not support the jury’s verdict of infringement to the extent that it is premised on an alleged error in the Court’s claim construction. b. The First Reflectance Reading Step Element (a) of the ’487 Patent requires taking a first reflectance reading from a dry first surface of the porous matrix. The jury’s finding that the out-of-meter application technique utilized by the Prestige meter infringes Claim 1 of the ’487 Patent requires the Court to assume that at least one element of the claim was not literally met in the Prestige meter. Comark, 156 F.3d at 1189, n. 3. While the evidence may not have been sufficient for the jury to conclude that this element was literally met by the Prestige meter, the Court concludes that Plaintiff presented substantial evidence from which the jury could have concluded that the equivalent of a dry first reflectance reading is taken when the Prestige meter is used with the out-of-meter blood application technique. For the doctrine of equivalents to apply, the element of the accused device at issue must perform substantially the same function, in substantially the same way, to achieve substantially the same result, and the patentee must present particularized testimony and linking argument to this effect. Dawn, 140 F.3d at 1014. With respect to element (a), the Court concludes that Plaintiff presented particularized testimony and sufficient linking argument that the out-of-meter application use of the Prestige meter takes at least the equivalent of a dry first reflectance reading. For example, Plaintiffs witness, Dr. Louder testified that Defendants programmed threshold reflectance values in the Prestige meter which correspond to wet and dry test strips. Dr. Smith then explained how these values are utilized so that the out-of-meter technique involves the equivalent of step (a). Dr. Smith explained that “because of quality control procedures that are performed at HDI [it is known] that each strip will have a reflectance above 75 percent in order to pass the quality control procedures. Therefore, the reflectance of the strip is known as if it had been measured.” (Tr. at 724:14-21). According to Dr. Smith, the requirement of step (a) is “to know that there has been a sufficient drop in reflectance to indicate that the sample has reached the bottom surface” and to one skilled in this area, knowing what the reflectance was by the manufacturing process and the quality assurance procedures is the equivalent of making that measurement of each strip within the meter. (Tr. at 725:7-14). In rendering his opinion that the equivalent of a dry first reflectance reading is taken by the Prestige meter when the out-of-meter application technique is used, Dr. Smith further explained: A. ... You have to either take that first reflectance reading, or perform the equivalent of it. If you perform the same function in the same way, and you wind up with the same result, then you have the equivalent of it. The function that we’re performing here is to determine the reflectance from a dry strip. The way we do that, the way the meter does that is by measuring the reflectance of a dry strip, and the result is that the reflectance of the dry strip is known. (Tr. at 726:3-13). Having established the function, way and result of step (a), Dr. Smith explained that the equivalent of this is done with the out-of-meter testing technique: [I]f the quality control procedures are followed, then the dry reflectance of the test strip is measured and it is — the dry reflectance is determined and the same function result — the same result is obtained, which is knowing the reflectance of a dry test strip. Q. Which is what in this case? A. Which in this case is in the high 80s or low 90-percent reflectance. Q. In any event, above 75 percent? A. Certainly, in order to pass the quality control procedures, it must be above the 75 percent, above the threshold. (Tr. at 726:16-727:5; see also PX-1034 at ¶ 6(a).) In addition to the testimony of Mr. Louder and Dr. Smith, Plaintiffs witness Mr. Kramer also testified that the Prestige meter performs the equivalent of step (a) when used with the out-of-meter blood application technique. Mr. Kramer explained that the Prestige meter measures the reflectance of an undersurface of an inserted test strip at intervals to determine whether the reflectance has dropped below a 70% threshold (PX-1031 at ¶ 8). The 70% threshold is programmed into the Prestige meter, because the Defendants knew that the reflectance value of a dry, unreacted Prestige strip would always be greater than 70% and 70% would correspond to the value of a test strip wetted with blood. (PX-1031 at ¶ 9). Consistent with Dr. Smith’s testimony, Mr. Kramer explained that quality control procedures carried out by HDI during the manufacture of the Prestige strips will confirm that the dry reflectance value of every Prestige strip will be above the 70% threshold: Q: Mr. Kramer, have you considered deposition testimony of Mr. Carrol in reaching your conclusion on infringement? A. Yes, I have. And again, here he was apparently the quality control person, and he tested a number of strip material — well, he quality controlled the material as it left the factory, and he told exactly how many tests he took from each strip and all that sort of thing. And his indication was that nothing below 70 percent would ever get into the marketplace. (Tr. at 934:4-14, 873:9-22; 876:21-880:20 & PX-1031 at ¶ 10). Mr. Kramer concluded that utilizing strip material that will result in the test strips having a dry reflectance value greater than 70%, as Defendants do through their quality control testing, is the equivalent of measuring the reflectance of each test strip before the blood sample is applied, as is required by step (a). Stated another way, the function of step (a) is to determine the reflectance of a dry test strip, the way this is done is by measuring the light reflected from a dry test strip, and the result is the obtaining of an initial, dry strip reflectance value. (PX-1031 at ¶ 12). Mr. Kramer opined that there is no substantial difference between taking an actual dry reflectance reading of a strip in the meter during a test and confirming the dry reflectance of the strips through quality control testing at the factory. According to Mr. Kramer, one skilled in the art would understand that Defendants’ method of determining the dry reflectance value of their strip and programming into the meter a reflectance threshold based on this dry reflectance value is interchangeable with the step of taking a dry reflectance value of each test strip in the meter itself. In addition to this evidence, the Court concludes that Plaintiffs counsel also provided sufficient linking argument during his closing argument. For example, Plaintiffs counsel explained to the jury with respect to step (a): [W]e see here insert the strip, and these are the dry reflectance readings up here which are taken. Now the same is true that a dry reflectance is taken in the out-of-meter use, and we mentioned that yesterday during Dr. Smith’s testimony. It’s that dot [sic done] right up here. And what that dot is indicating is a reflectance reading which is taken by— in essence taken by the defendants back at the factory. You may remember Mr. Carroll’s testimony saying that yes, they do do a lot of quality control testing on these strips and they make sure the strips have re-flectances between 86 and 92. And that — and we saw that in Dr. Bell’s chart where he brought strips in which was a more typical 89 percent value, so that they knew the reflectances of the strips because they’ve taken them. This is an equivalence of taking the reading right in the meter to start with, of course, because it’s done elsewhere, but in method what we’re looking at is not as you will hear from the Court that every step of the method has to be done in the meter, but some steps or their equivalence can be done elsewhere as long as they’re done. And that’s what happens in the out-of-meter situation. They do it back at the factory in essence and then they start knowing this has a dry reflectance of 89 or 90, actually somewhere between 86 and 92. (Tr. at 2591:24-2593:7). Because the Court finds that Plaintiff presented sufficient testimony and linking evidence that the out-of-meter application use of the Prestige meter performs the equivalent of a dry first reflectance reading, the Court will deny Defendants’ Motion For Judgment As A Matter Of Law on this issue. c. The Applying Step Defendants’ next contend that the out-of-meter application use of the Prestige meter does not perform the applying step of Claim 1 of the ’487 Patent. Defendants’ argument in this regard is premised entirely on Defendants’ contention that the Court improperly construed the term “porous, reflectance-reading matrix located in said [reflectance-reading] device” to mean that “the porous matrix need not be in the meter when the sample is applied.” (D.I. 423 at 7). For the reasons discussed previously, the Court declines to revisit its claim construction. Accordingly, the Court rejects Defendants’ argument that the Prestige meter does not perform the applying step of Claim 1 and denies Defendants’ motion for judgment as a matter of law on this issue. 4. Summary In sum, the Court concludes that insufficient evidence supports the jury’s verdict that the out-of-meter application use of the Prestige meter infringes Claim 1 of the ’487 Patent under the doctrine of equivalents. While the Court rejects Defendants argument that the Court erred in its claim construction and rejects Defendants’ arguments that the out-of-meter use of the Prestige does not perform the dry first reflectance reading and the applying step, the Court agrees with Defendants argument that Plaintiffs failed to establish that step (e) was literally or equivalently present in the Prestige meters. Accordingly, the Court concludes that Defendants are entitled to a judgment of non-infringement as a matter of law. II. Defendants’ Motion For Judgment As A Matter Of Law On The Issue Of Validity In moving for judgment as a matter of law on the issue of validity, Defendants challenge the jury’s verdict that the ’487 Patent is valid. Specifically, Defendants contend that they presented clear and convincing evidence that the ’487 Patent is invalid as anticipated by the Garcia invention and/or the Garcia ’398 Patent. In addition, Defendants contend that they presented clear and convincing evidence that Claim 1 was obvious over the combination of the Jessop ’566 Patent and the Ektachem DT-60 analyzer. The Court will address each of Defendants’ arguments in turn. A. Whether Substantial Evidence Supports The Jury’s Conclusion That Claim, 1 of the %87 Patent Is Not Invalid as Anticipated by the Garcia Invention and/or the Garcia Patent 1. Applicable law As a general matter, for a patent to be invalid as anticipated under 35 U.S.C. § 102(g), the party challenging validity must show that the potentially invalidating patent or invention (1) qualifies as prior art; (2) was not abandoned suppressed or concealed; and (3) is identical to the claimed invention or process. In order for a potentially invalidating invention to qualify as prior art, the party challenging validity must show that the potentially invalidating invention or patent has priority over the claimed invention. See e.g., Thomson S. A v. Quixote Corporation, 166 F.3d 1172, 1175 & n. 3 (Fed.Cir.1999). To show identicality between prior art and the claimed invention, the party challenging validity m