Full opinion text
OPINION AND ORDER REGARDING CROSS-MOTIONS FOR SUMMARY JUDGMENT AND DEFENDANT’S MOTION FOR CLAIM CONSTRUCTION GERALD E. ROSEN, District Judge. I. INTRODUCTION Plaintiff Welker Bearing Company commenced this suit in this Court on July 25, 2006, alleging that certain pin clamps offered or sold by Defendant PHD, Inc. infringe two patents held by Plaintiff. Defendant denies these allegations of infringement, and also has asserted an affirmative defense of patent invalidity. This Court’s jurisdiction rests upon Plaintiffs assertion of claims under the federal patent laws, 35 U.S.C. § 1 et seq. See 28 U.S.C. § 1338(a). Through cross-motions filed on May 31 and June 18, 2007, each of the parties seeks summary judgment in its favor as to the infringement or non-infringement of the two patents-in-suit, U.S. Patent No. 6,786,478 (the “'478 patent”) and U.S. Patent No. 6,913,254 (the “'254 patent”). In addition, Defendant filed a May 31, 2007 motion seeking the Court’s acceptance of its proposed construction of claim 1 of the '254 patent. Each of these motions has been fully briefed by the parties, and the Court heard oral argument on these motions on November 29, 2007. Having reviewed the parties’ written submissions and the record as a whole, and having considered the arguments of counsel at the November 29 hearing, the Court now is prepared to rule on these three motions. This opinion and order sets forth the Court’s rulings on these matters. II. FACTUAL BACKGROUND Although the specific patent claims and products involved in this suit are discussed in greater detail below, as pertinent to the particular issues raised by the parties, it is helpful at the outset to describe the general nature of the inventions and products at issue here. In particular, this case concerns pin clamps that are used, in the automobile industry and in other industrial settings, to hold a work piece (such as a sheet of metal) securely in place during welding or other manufacturing processes. These pin clamps feature a locating pin that is inserted into a hole in the work piece, whereupon clamping fingers emerge out of the locating assembly and hold the work piece in place. Plaintiff Welker Bearing Company and one of its contract employees, Joseph M. Pavlik, jointly own the rights to two patents for such pin clamps. The first of the two patents-in-suit, U.S. Patent No. 6,786,-478 (the “'478 patent”), was issued on September 7, 2004. The second patent-in-suit, U.S. Patent No. 6,913,254 (the “'254 patent”), was issued on July 5, 2005. Mr. Pavlik has granted Plaintiff an exclusive license to all of his rights in these two patents. The two patents-in-suit are quite similar. Indeed, the patent examiner initially rejected the '254 patent on non-statutory “double patenting” grounds. To overcome this rejection, Plaintiff executed a “Terminal Disclaimer” on January 12, 2005, under which Plaintiff disclaimed the terminal part of the statutory term of the '254 patent that otherwise would have extended beyond the expiration of the '478 patent. In this case, Plaintiff asserts that these patents are infringed by two of Defendant’s products. Defendant began development of the first of these products, the “PHD Series PLC Clamp I” (“Clamp I”), in late 2003, in response to the demands of one of its major customers, General Motors. During the development process, Defendant’s employees were shown one of Plaintiffs pin clamps, but Defendant denies that it saw the internal workings of Plaintiffs clamp until October of 2004. As discussed in greater detail below, Defendant contends that Clamp I never proceeded beyond the prototype phase, that only a handful were made, and that none were sold. Defendant further asserts that it did not engage in any sort of commercial activity relative to Clamp I at any point after the '478 patent was issued on September 7, 2004. On November 15, 2004, the parties met to discuss the possibility of licensing the '478 patent. When these discussions failed to produce an agreement, Defendant commenced an effort to design around Plaintiffs patent. This process resulted in the second of Defendant’s products at issue here, the “PHD Series PLC Clamp II” (“Clamp II”), which was made commercially available in June of 2005. As addressed below, the disposition of this infringement suit turns largely upon the extent of Defendant’s success in designing around the inventions disclosed in the two patents-in-suit. III. ANALYSIS A. Defendant’s Motion for Claim Construction 1. The Law Governing Defendant’s Motion The Court turns first to Defendant’s motion for claim construction, in light of the impact of this matter upon the issues raised in the parties’ remaining motions. The interpretation of patent claims is “exclusively within the province of the court.” Markman v. Westview Instruments, Inc., 517 U.S. 370, 372, 116 S.Ct. 1384, 1387, 134 L.Ed.2d 577 (1996). The principal focus of claim construction is the language of the claims themselves, as “the claims are of primary importance, in the effort to ascertain precisely what it is that is patented.” Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed.Cir.2005) (internal quotation marks and citation omitted). “[T]he words of a claim are generally given their ordinary and customary meaning”— that is, “the meaning that the term[s] would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips, 415 F.3d at 1312-13 (internal quotation marks and citations omitted). In some cases, this “ordinary meaning” is simply the “widely accepted meaning of commonly understood words,” but it may prove necessary in other cases to consider whether a claim’s terms “have a particular meaning in a field of art” that is “not immediately apparent” to those outside this field. 415 F.3d at 1314. While claim construction begins with the language of the claim itself, it bears emphasis that a patent’s claims “do not stand alone,” but rather “are part of a fully integrated written instrument” that also includes a specification. 415 F.3d at 1315 (internal quotation marks and citation omitted). Thus, “claims must be read in view of the specification, of which they are a part,” and the specification is “the single best guide to the meaning of a disputed term.” 415 F.3d at 1315 (internal quotation marks and citation omitted). Moreover, “the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” 415 F.3d at 1313. “The construction that stays true to the claim language and most naturally aligns with the patent’s description of the invention will be, in the end, the correct construction.” 415 F.3d at 1316 (internal quotation marks and citation omitted). Beyond the four corners of the written instrument, the Court also may consider “intrinsic evidence” — consisting of “the complete record of the proceedings before” the Patent and Trademark Office (“PTO”), including “the prior art cited during the examination of the patent” — and “extrinsic evidence” — which includes “expert and inventor testimony, dictionaries, and learned treatises.” 415 F.3d at 1317 (internal quotation marks and citations omitted). Yet, the intrinsic evidence “is less useful for claim construction purposes” than the claim language itself, and the extrinsic evidence is still “less significant than the intrinsic record in determining the legally operative meaning of claim language.” 415 F.3d at 1317 (internal quotation marks and citations omitted). With these standards in mind, the Court turns to the claim construction task implicated by Defendant’s motion — namely, the interpretation of the disputed elements of claim 1 of the '254 patent. 2. The Reference in Claim 1 to a “Mechanism” for Moving Clamping Fingers Into and Out of the Locating Assembly Discloses a Means-Plus-Function Limitation Governed by 35 U.S.C. § 112 ¶6. Although the parties fault each other for their failure to reach an agreement as to precisely which aspects of claim 1 remain in dispute, it is evident from their submissions that Plaintiff and Defendant disagree only as to one element of this claim. Specifically, the parties dispute the meaning to be given to the claim language referencing a “mechanism” for moving the pin clamp’s fingers into and out of the locating assembly. Through the present motion, Defendant contends that the term “mechanism” as used in claim 1 should be viewed as a means-plus-function limitation, such that this term must be construed as encompassing only the corresponding structure described in the patent specification for performing the function of this “mechanism.” The Court agrees. The disputed term is found near the end of claim 1, which reads in its entirety: 1. A locating and clamping assembly comprising: a body defining an internal cavity and an opening from said cavity to the exterior of said body; a locating pin disposed in said cavity and extending along an axis A out of said opening to a distal end; an actuator for moving said locating pin rectilinearly along said axis A into and out of said opening; at least one finger supported by said locating pin adjacent said distal end; said assembly characterized by a mechanism for moving said finger along a straight line into and out of said locating pin perpendicular to said axis A in response to said rectilinear movement of said locating pin. (Defendant’s App’x, Ex. D, '254 patent at 8:12-24 (emphasis added).) Apart from their dispute over the term “mechanism,” the parties evidently agree as to the ordinary and customary meaning that should be assigned to the remaining elements of this claim. As to this sole disputed element, the parties’ disagreement turns upon whether the term “mechanism” dictates that this element be construed as a means-plus-function limitation governed by 35 U.S.C. § 112 ¶ 6. Under this statutory provision, a claim element “may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof,” in which case the claim “shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.” 35 U.S.C. § 112 ¶ 6. As the Federal Circuit has explained, § 112 ¶ 6 “permit[s] the use of purely functional language in claims,” but “limit[s] the breadth of such claim language by restricting its scope to the structure disclosed in the specification and equivalents thereof.” Greenberg v. Ethicon Endo-Surgery, Inc., 91 F.3d 1580, 1582 (Fed.Cir.1996). “In determining whether a claim limitation is a means-plus-function limitation, the use of the word ‘means’ creates a presumption that § 112, f 6 applies.” Wenger Manufacturing, Inc. v. Coating Machinery Systems, Inc., 239 F.3d 1225, 1232 (Fed.Cir.2001) (internal quotation marks and citation omitted). By the same token, if the word “means” does not appear, the limitation in question “is presumptively not subject to [§ ] 112 ¶ 6.” Massachusetts Institute of Technology v. Abacus Software (hereafter “MIT"), 462 F.3d 1344, 1353 (Fed.Cir.2006) (emphasis added). Nonetheless, “a limitation lacking the term ‘means’ may overcome the presumption against means-plus-function treatment if it is shown that the claim term fails to recite sufficiently definite structure or else recites function without reciting sufficient structure for performing that function.” MIT, 462 F.3d at 1353 (internal quotation marks and citations omitted). In this case, Defendant argues that the presumption against means-plus-function treatment is overcome by the use of the term “mechanism” in a purely functional way, unaccompanied by any sort of language suggestive of a structure that performs the function of this “mechanism.” As Defendant points out, MIT itself was a case in which the Federal Circuit held that a claim’s reference to “mechanism” was synonymous with “means,” and hence was properly construed as disclosing a means-plus-function limitation. The patent in that case “disclose[d] a color processing system for producing copies of col- or originals,” and one of the elements of claim 1 of this patent was a “colorant selection mechanism” that received “appearance signals” derived from a scanned original image and selected “corresponding reproduction signals” that would result in a “colorimetrically-matched reproduction.” MIT, 462 F.3d at 1348. The district court construed the phrase “colorant selection mechanism” as a means-plus-function limitation, and the Federal Circuit affirmed: We agree with the district court’s conclusion that the presumption here [against means-plus-function treatment] is overcome and that the phrase “colorant selection mechanism” should be construed as a means-plus-function limitation. The generic terms “mechanism,” “means,” “element,” and “device,” typically do not connote sufficiently definite structure.... Here, the patentee used “mechanism” and “means” as synonyms. At least one dictionary definition equates mechanism with means. See The Random House Webster’s Unabridged Dictionary 1193 def. 2 (2d ed.1998) (defining “mechanism” as “the agency or means by which an effect is produced or a purpose is accomplished”); see also The Random House Dictionary of the English Language — The Unabridged Edition 889 (1973) (same). The term “mechanism” standing alone connotes no more structure than the term “means.” 462 F.3d at 1354 (citations omitted). In so ruling, the court distinguished an earlier decision, Greenberg, supra, 91 F.3d at 1583-84, in which another Federal Circuit panel had held that the phrase “detent mechanism” did not trigger means-plus-function treatment under § 112 ¶6. In Greenberg, the district court had concluded that “detent mechanism” was subject to § 112 ¶ 6, in part “because the term did not describe a particular structure but described any structure that performed a detent function.” Greenberg, 91 F.3d at 1583. The Federal Circuit found this reasoning insufficient to justify means-plus-function treatment: ... [T]he fact that a particular mechanism — here “detent mechanism” — is defined in functional terms is not sufficient to convert a claim element containing that term into a “means for performing a specified function” within the meaning of section 112(6). Many devices take their names from the functions they perform. The examples are innumerable, such as “filter,” “brake,” “clamp,” “screwdriver,” or “lock.” Indeed, several of the devices at issue in this case have names that describe their functions, such as “graspers,” “cutters,” and “suture applicators.” “Detent” (or its equivalent, “detent mechanism”) is just such a term. Dictionary definitions make clear that the noun “detent” denotes a type of device with a generally understood meaning in the mechanical arts, even though the definitions are expressed in functional terms. It is true that the term “detent” does not call to mind a single well-defined structure, but the same could be said of other commonplace structure terms such as “clamp” or “container.” What is important is not simply that a “detent” or “detent mechanism” is defined in terms of what it does, but that the term, as the name for structure, has a reasonably well understood meaning in the art. 91 F.3d at 1583 (citations omitted). Despite some similarity in the language at issue — “colorant selection mechanism” in MIT versus “detent mechanism” in Greenberg — the court in MIT nonetheless found that Greenberg was distinguishable: Claim language that further defines a generic term like “mechanism” can sometimes add sufficient structure to avoid [§ ] 112 ¶ 6. For example, in Greenberg v. Ethicon Endo-Surgery, Inc., 91 F.3d 1580 (Fed.Cir.1996), which involved a mechanical device, we held that [§ ] 112 ¶ 6 did not apply to the term “detent mechanism” because “the noun ‘detent’ denotes a type of device with a generally understood meaning in the mechanical arts, even though the definitions are expressed in functional terms.” Id. at 1583. The court recited several dictionary definitions for “de-tent,” including “a mechanism that tern-porarily keeps one part in a certain position relative to that of another, and can be released by applying force to one of the parts.” Id. (internal quotation marks and citations omitted). These definitions connoted sufficient structure to avoid [§ ] 112 ¶ 6 .... In contrast, the term “colorant selection,” which modifies “mechanism” here, is not defined in the specification and has no dictionary definition, and there is no suggestion that it has a generally understood meaning in the art. We therefore agree with the district court that “colorant selection mechanism” does not connote sufficient structure to a person of ordinary skill in the art to avoid [§ ] 112 ¶ 6 treatment. MIT, 462 F.3d at 1354 (footnotes omitted). Returning to the present case, this Court readily concludes that the claim language at issue here is far more analogous to the “colorant selection mechanism” of MIT than to the “detent mechanism” of Greenberg. As explained in MIT, “[t]he term ‘mechanism’ standing alone connotes no more structure than the term ‘means.’ ” MIT, 462 F.3d at 1354. It follows that a “mechanism” should ordinarily be construed as a means-plus-function limitation absent accompanying claim language that is suggestive of structure, at least to a person of ordinary skill in the relevant art. This, then, was the crucial distinction between the claim language addressed in Greenberg and in MIT — the additional “detent” qualifier in the former case was found to be a “name for structure” that had a “reasonably well understood meaning in the art,” Greenberg, 91 F.3d at 1583, while the “colorant selection” modifier in the latter case lacked any comparable structural connotation that was “generally understood in the art,” MIT, 462 F.3d at 1354. The term “mechanism” as used in claim 1 of the '254 patent is still further along the means-plus-function spectrum than the “colorant selection mechanism” under consideration in MIT, because the reference to a “mechanism” in this case is utterly unaccompanied by any language that is suggestive of structure, whether specific or generic. As stated earlier, the pertinent portion of claim 1 discloses a locating and clamping assembly that is “characterized by a mechanism for moving said finger along a straight line into and out of said locating pin perpendicular to said axis A in response to said rectilinear movement of said locating pin.” All that can be said about this “mechanism” is that it moves the device’s clamping fingers into and out of the locating pin in a direction perpendicular to the axis along which the locating pin travels, and that it does so in response to the “rectilinear movement” of the locating pin into and out of an opening in the clamping assembly. While this claim language discloses the function to be performed by the referenced “mechanism” — namely, to move the clamping fingers in a specified direction in response to the movement of the locating pin — it says nothing at all about any sort of structure for performing this function. Nor is the generic term “mechanism” modified or further defined by any accompanying claim language that might connote structure, whether under an ordinary dictionary definition or to a person of ordinary skill in the relevant art. Rather, the term “mechanism” stands alone, and therefore “connotes no more structure than the term ‘means.’ ” MIT, 462 F.3d at 1354. It follows that the presumption against means-plus-function treatment has been overcome, and that the “mechanism” referred to in claim 1 of the '254 patent must be construed in accordance with § 112 ¶ 6 — i.e., it must be restricted in scope “to the structure disclosed in the specification and equivalents thereof.” Greenberg, 91 F.3d at 1582. Although Plaintiff suggests a number of grounds for avoiding this result, the Court finds none of them persuasive. First and foremost, Plaintiff contends that the need for any construction of claim 1 of the '254 patent has been obviated by Defendant’s purported concession in discovery that all of the claim’s terms should be given their “ordinary meaning.” As evidence of Defendant’s purported “admission” on this point, Plaintiff cites (i) the deposition testimony of Defendant’s vice president, William Davenport, who was designated as the firm’s deponent under Fed.R.Civ.P. 30(b)(6), and (ii) Defendant’s objection to Plaintiffs interrogatory requesting that Defendant identify any claim terms that should be given a “special meaning” rather than their “common and ordinary meaning.” Contrary to Plaintiffs assertion, the Court sees nothing in Defendant’s conduct during discovery that might constitute any sort of “waiver” of Defendant’s opportunity to advocate a particular claim construction in the course of dispositive motion practice. First, in the deposition testimony cited by Plaintiff, Mr. Davenport was not asked to offer any sort of construction of the term “mechanism” as used in claim 1. Rather, he was asked only (i) whether Defendant’s allegedly infringing product “has a mechanism for moving [a clamping] finger along a straight line into and out of the locating pin,” (ii) whether the straight line along which the clamping finger moves in Defendant’s product is “perpendicular to the axis that has the rectilinear movement of the locating pin,” and (iii) whether the mechanism in Defendant’s product moves the clamping fingers “in response to rectilinear movement of the locating pin.” (Plaintiffs Response, Ex. A, Davenport Dep. at 156-57.) By acknowledging that Defendant’s product has such a “mechanism,” Mr. Davenport was in no way confirming, or even postulating, that claim 1 of the '254 patent should be construed as encompassing any and all pin clamps that have any sort of “mechanism,” as that term is commonly understood, for performing the function described in this claim. Indeed, nothing in the cited passage of his deposition testimony can be viewed as an expression of any opinion whatsoever as to how any element of claim 1 should be construed, much less whether any of this claim’s terms might trigger means-plus-function treatment under § 112 ¶ 6. Instead, Mr. Davenport merely was asked to confirm that Defendant’s product had certain features and performed certain functions as identified by Plaintiffs counsel. The Court is at a loss to see how this testimony can be viewed as reflecting, much less limiting, the claim construction positions that Defendant would or could advocate in its dispositive motion practice. Neither can the Court discern how Defendant’s objection to an interrogatory might be construed as either (i) an acknowledgment that Plaintiffs view of the “ordinary meaning” of claim 1 was correct, or (ii) a waiver of any opportunity to propound a means-plus-function reading of the term “mechanism” as used in this claim. In the interrogatory in question, Defendant was asked to identify any terms in the patents-in-suit that it believed should be given a “special meaning different from the[ir] common and ordinary meaning.” (Plaintiffs Response, Ex. B, Interrogatory No. 10.) Defendant responded by objecting to the interrogatory as “premature,” where “[discovery ha[d] just begun,” no deadlines had been set “relative to claim construction issues,” and Plaintiff purportedly had yet to “identify] what claims of the patents-in-suit it contends to have been infringed and [which of Defendant’s] products it believes to embody one or more of the claims of the patents-in-suit.” (Id.) Because Defendant evidently did not supplement this response at any point during discovery, Plaintiff surmises that Defendant should be bound by the “ordinary meaning” of the terms of claim 1. This argument is riddled with flaws, both factual and logical. First, the Court notes that Defendant’s above-quoted discovery objection was merely an early salvo in a protracted squabble, spanning essentially the entire discovery period, over the timing, sequencing, and sufficiency of the parties’ discovery responses regarding matters of claim construction. Plaintiff promptly responded to Defendant’s objection by moving to compel full and complete responses to its first set of interrogatories. Yet, in a stipulated order dated December 27, 2006, the scheduled hearing on Plaintiffs motion was cancelled in light of Defendant’s agreement to supplement certain of its interrogatory responses. Notably, the interrogatory now identified by Plaintiff was not mentioned in this stipulated order — instead, this order recited Defendant’s broader agreement to “provide its claim construction pursuant to a scheduled exchange as agreed to by counsel.” (12/27/2006 Order at 2.) Since the parties did not exhibit any particular reluctance to seek the Court’s intervention in their discovery disputes, the Court can only assume that Defendant satisfactorily discharged this obligation. In any event, Plaintiff fails to explain why the means-plus-function construction advanced in Defendant’s motion should qualify as a “special meaning” that Defendant was obligated to identify in response to Plaintiffs interrogatory, as opposed to merely an “ordinary” meaning that happens to differ from the “ordinary” meaning that Plaintiff would assign to the term “mechanism” as used in claim 1. To the extent that Plaintiff means to suggest that judicial claim construction is unnecessary so long as the parties agree that a claim’s terms should be given their “ordinary meaning,” this unduly discounts the capacity of patent litigants to argue over what this “ordinary meaning” should be. As one court recently observed, “parties in patent cases rarely agree on the ‘ordinary meaning [of patent terms] as understood by a person of skill in the art,’ so that asserting that such a meaning should apply, without further construction, merely begs the question of what that meaning is.” Maytag Corp. v. Electrolux Home Products, Inc., 411 F.Supp.2d 1008, 1037 (N.D.Iowa 2006) (alteration in original). Likewise, it begs the question in this case to appeal, without further discussion or explanation, to the “ordinary meaning” of the term “mechanism,” because the “ordinary meaning” of this term, along with the words that accompany or modify it, determines whether means-plus-function treatment is warranted. Accordingly, the Court rejects Plaintiffs unstated premise that Defendant has advanced some sort of novel claim construction position by urging a means-plus-function interpretation of claim 1. More fundamentally, even if Plaintiff could establish some element of sandbagging or “unfair surprise” in Defendant’s motion — and the record falls well short of such a showing — there is no indication of any resulting prejudice or need for remedial measures. If, for example, Defendant had provided misleading or incomplete discovery responses that caused Plaintiff to forgo a particular line of inquiry, the proper remedy at this juncture would be a request for additional discovery pursuant to Fed.R.Civ.P. 56(f). Indeed, Plaintiff has made just such a request in response to one of the grounds advanced in Defendant’s other pending motion, arguing that Defendant seeks to rely on a prior art reference that was not timely identified during discovery. In its response to Defendant’s motion for claim construction, in contrast, Plaintiff fails to suggest any impediment to its ability to advocate an interpretation of claim 1 that differs from the one sought by Defendant. Consequently, the Court sees no reason to abstain from construing the disputed terms of claim 1, at least to the extent that such claim interpretation is a necessary predicate to the resolution of the parties’ cross-motions for summary judgment. Having addressed Plaintiffs threshold procedural challenges to Defendant’s request for a judicial construction of claim 1 of the '254 patent, the Court turns to Plaintiffs substantive challenges, such as they are, to the particular claim construction advocated by Defendant. Beyond terse expressions of surprise, with little or no accompanying explanation, that Defendant has failed to discuss certain decisions that Plaintiff views as most relevant to the claim construction inquiry, Plaintiff first contends that Defendant has failed to produce the “substantial amount of proof’ that purportedly is necessary to overcome the presumption against means-plus-function treatment of claim elements that lack the word “means.” Yet, the decision in MIT belies any such claim of an onerous evidentiary burden, where the court in that case relied solely on (i) language within the four corners of the patent-in-suit, (ii) a dictionary definition that “equates mechanism with means,” and (iii) the absence of evidence that the modifying “colorant selection” language had “a generally understood meaning in the art.” MIT, 462 F.3d at 1354. There is even less of a need here for Defendant to supply a “substantial amount of proof’ in order to overcome the presumption against means-plus-function treatment. As explained earlier, and in contrast to the claim language at issue in MIT, the term “mechanism” in claim 1 of the '254 patent is utterly unaccompanied by any language that modifies this “generic term” or that might connote “sufficient structure to avoid [§ ] 112 ¶ 6.” MIT, 462 F.3d at 1354. Rather, the accompanying language merely discloses the function that this “mechanism” performs, without in any way suggesting a structure that might perform this function. Under these circumstances, it is enough for Defendant to point to (i) the Federal Circuit’s express recognition that “[t]he term ‘mechanism’ standing alone connotes no more structure than the term ‘means,’ ” MIT, 462 F.3d at 1354, and (ii) the absence of any accompanying claim language that might be understood by a person of ordinary skill in the art as connoting a structure that performs the stated function. Certainly, with the one possible exception discussed below, Plaintiff has not identified any such language in claim 1 that supplies the structure that is otherwise lacking in the unadorned reference to “mechanism” alone. In a relatively easy case like the present one, where the term “mechanism” is “simply a nonce word or a verbal construct that is not recognized as the name of structure and is simply a substitute for the term ‘means for,’ ” Lighting World, supra, 382 F.3d at 1360, the Court is confident that Defendant need not shoulder a particularly heavy burden in overcoming the presumption against means-plus-function treatment. Plaintiff next contends that Defendant’s proposed construction of claim 1 runs afoul of the doctrine of claim differentiation, under which each claim in a patent is presumed to have a different scope. See Comark Communications, Inc. v. Harris Corp., 156 F.3d 1182, 1187 (Fed.Cir.1998). If claim 1 were construed as including a means-plus-function limitation, thereby restricting its scope by reference to the corresponding structure described in the patent specification, Plaintiff submits that the result would be to eliminate a significant distinction between independent claim 1 and dependent claims 4, 5, and 6. In particular, claims 4 through 6 add structure to the “mechanism” of claim 1, disclosing that this “mechanism” includes a rotating central post. Yet, this same “rotating central post” limitation would be incorporated into claim 1, by way of the patent specification, if this claim’s reference to the term “mechanism” were construed as a means-plus-function limitation. As recognized in Comark Communications, however, “the doctrine of claim differentiation is not a hard and fast rule of construction,” but rather establishes only a “presumption that each claim in a patent has a different scope.” Comark Communications, 156 F.3d at 1187. Indeed, the Federal Circuit has expressly emphasized, in decisions both before and after Comark Communications, that “the judicially developed guide to claim interpretation known as ‘claim differentiation’ cannot override ... the express mandate of section 112(6).” Laitram Corp. v. Rexnord, Inc., 939 F.2d 1533, 1538 (Fed.Cir. 1991); see also Wenger Manufacturing, supra, 239 F.3d at 1233. Moreover, the court has cautioned that “[a] means-plus-function limitation is not made open-ended by the presence of another claim specifically claiming the disclosed structure which underlies the means clause or an equivalent of that structure,” as such a rule of construction “would provide a convenient way of avoiding the express mandate of section 112(6).” Laitram Corp., 939 F.2d at 1538. This same reasoning defeats Plaintiffs appeal in this case to the doctrine of claim differentiation. Regardless of whether a means-plus-funetion limitation might diminish, or even eliminate, the distinction between claim 1 and claims 4 through 6 of the '254 patent, the Court has already explained why, in its view, there is simply no tenable reading of the term “mechanism” and the surrounding language of claim 1 that would connote sufficient structure to avoid the application of § 112 ¶ 6. The situation was different in Wenger Manufacturing, 239 F.3d at 1233-34, for example, where the court applied the doctrine of claim differentiation to ensure that a means-plus-function limitation was confined strictly to those “structural limitations from the written description that are []necessary to perform the claimed function.” Thus, while the Court is mindful, as discussed below, of a similar need here to avoid the sweeping importation into claim 1 of structural elements that are not necessary to fulfill the function of the “mechanism” disclosed in that claim, the Court cannot allow a rule of construction to override the statutory command of § 112 ¶ 6 where, as here, a claim element is stated in purely functional terms. Plaintiff next suggests that Defendant’s proposed construction of claim 1 is somehow undermined by the Federal Circuit’s recent decision in Applied Medical Resources Corp. v. United States Surgical Corp., 448 F.3d 1324 (Fed.Cir.2006). Yet, the parties in that ease agreed almost entirely as to the proper construction of the claim at issue, and the court found that the one possible point of dispute was not preserved for appeal. See Applied Medical Resources, 448 F.3d at 1332-33 (electing to “apply the undisputed claim construction adopted by the district court”). The significance of that decision, then, lies not in its discussion of claim construction principles, but rather — as Plaintiff itself characterizes it — in its “enunciat[ion][of] a precise process for determining infringement of a ‘means plus function’ claim.” (Plaintiffs Response Br. at 7 (emphasis added).) Plaintiff does not explain what bearing, if any, Applied Medical Resources should have on the proper disposition of Defendant’s motion for claim construction, and its relevance likewise is not evident to the Court. Next, and rather remarkably, Plaintiff requests that the Court permit “full briefing” on the issue of claim construction, so that the parties and the Court alike may “not only decide the claims that need to be evaluated, but also clarify the decisions to be made, and the standards against which those decisions need to be framed.” (Id. at 8.) Yet, Plaintiff fails to suggest any reason why the parties’ existing round of briefing on Defendant’s present motion for claim construction would not qualify as the desired “full briefing” on this subject. Neither has Plaintiff identified any impediment to its opportunity to fully address all of the issues of relevance to the Court’s claim construction effort within the four corners of its response to Defendant’s motion. To the contrary, Plaintiff appears to have accurately identified the points — or, more accurately, the single point — upon which the parties disagree in light of the arguments raised and interpretations propounded in Defendant’s motion, and has taken the opportunity in its response to advance various reasons why its proposed construction should prevail over Defendant’s as to this single point of contention. Under these circumstances, the Court finds no basis for permitting supplemental briefing on issues that have been thoroughly addressed and debated in the parties’ initial round of briefs, as well as at oral argument. Indeed, at the November 29 hearing, Plaintiff and its counsel suggested for the first time that claim 1 does, in fact, disclose structure corresponding to its “mechanism” element. In particular, Plaintiff contends that the term “mechanism” should be construed as part and parcel of the “actuator” referenced earlier in claim 1. Plaintiff further asserts that an “actuator,” like the “detent” qualifier in Greenberg, supra, 91 F.3d at 1583, is a “name for structure” that has a “reasonably well understood meaning in the art.” In Plaintiffs view, then, the close relationship between the “actuator” and “mechanism” elements of claim 1 obviates the need to consult the patent specification to determine the structure corresponding to the latter element. This proposed construction, however, cannot be squared with either the language of claim 1 itself or the overall patent of which it is a part. First and foremost, claim 1 discloses an “actuator” and a “mechanism” as two distinct elements that perform different functions. Under the express language of the claim, the “actuator” performs the function of “moving said locating pin rectilinearly along said axis A into and out of said opening” in the device’s locating and clamping assembly. The “mechanism,” in contrast, performs the function of “moving said finger along a straight line into and out of said locating pin perpendicular to said axis A in response to said rectilinear movement of said locating pin.” To be sure, these functions are related, with the “mechanism” moving the device’s clamping fingers “in response to” the actuator’s movement of the locating pin. Yet, the two functions are nonetheless distinct, as the claim itself makes clear by disclosing them in two separate elements. There is simply no basis in the language of claim 1 for treating the “mechanism” as somehow ancillary to, and structurally defined by reference to, the “actuator” that serves a wholly distinct purpose in the overall device. The specification confirms this distinction. It summarizes the invention as including an “actuator” that “moves the locating pin rectilinearly along the axis into and out of the opening” in the locating assembly, as well as a “mechanism” that “rotates in response to the rectilinear movement of the locating pin for moving the finger radially.” ('254 patent at 2:21-27.) It then devotes entire paragraphs to separately defining and describing (i) an “actuator 52” that is mounted to the body of the locating assembly and connected to the locating pin through a pin mount, and that performs the function of “rectilinearly moving the locating pin 12 along the axis A” using a combination of a piston, coupler, and coupler plate, (id. at 4:56-5:18), and (ii) a “mechanism 68” that includes a rotating central post “disposed between the actuator 52 ... and the fingers” that “rotates in response to the rectilinear movement” of the actuator, as well as a “motion converter” that converts the rotational movement of the central post into radial movement of the fingers, (id. at 6:3-27). The separate functions and structures of the “actuator” and “mechanism” are emphasized in the description of the latter’s central post as “independent from” the actuator’s piston in order to “separat[e] the rotational movement of the central post 70 from the rectilinear movement of the locating pin 12.” (Id. at 6:14-16.) Similarly, the accompanying figures depict the “actuator” and “mechanism” as wholly distinct parts of the device with separate, albeit adjacent, structural components. Thus, if one were to review only those portions of the specification addressing the “actuator,” no hint could be found of any structure corresponding to the distinct function performed by the “mechanism” in the patented device. Likewise, if one were to construct an “actuator” in accordance with the specification, the resulting component would not perform the function assigned to the “mechanism” — namely, moving the device’s clamping fingers in a straight line into and out of the locating pin in a direction perpendicular to the axis along which the locating pin moves. The Federal Circuit has recognized a presumption that the use of different terms “connotes different meanings.” CAE Screenplates Inc. v. Heinrich Fiedler GmbH & Co., 224 F.3d 1308, 1317 (Fed. Cir.2000); see also Innova/Pure Water, Inc. v. Safari Water Filtration Systems, Inc., 381 F.3d 1111, 1119 (Fed.Cir.2004) (explaining that the use of “different terms in a claim” raises the inference that the applicant “intended his choice of different terms to reflect a differentiation in the meaning of those terms”); Ethicon Endo-Surgery, Inc. v. United States Surgical Corp, 93 F.3d 1572, 1579 (Fed.Cir.1996) (holding that the “plain meaning” of the claim at issue in that case would “not bear a reading” under which two different claim terms were construed as describing a single element). Plaintiff has not identified any basis for overcoming this presumption here, but instead offers only its counsel’s bare assertion at the November 29 hearing that the terms “actuator” and “mechanism” are used interchangeably in claim 1. Because such a reading is contrary to both the language of the claim itself and the patent as a whole, the Court adheres to its determination that the term “mechanism” discloses a means-plus-function limitation governed by § 112 ¶ 6. There remains only the question of precisely how the Court should construe this means-plus-function limitation. As noted earlier, the application of § 112 ¶ 6 dictates that the “mechanism” referenced in this claim must be restricted in scope “to the structure disclosed in the specification and equivalents thereof.” Greenberg, 91 F.3d at 1582. Yet, the Court must take care not to “import functional limitations that are not recited in the claim, or structural limitations from the written description that are unnecessary to perform the claimed function.” Wenger Manufacturing, 239 F.3d at 1233. In this case, this means that the Court should look to the specification only for those structural limitations that are necessary to perform the function of the “mechanism” referenced in claim 1 — i.e., the function of “moving said finger along a straight line into and out of said locating pin perpendicular to said axis A in response to said rectilinear movement of said locating pin.” In Defendant’s view, this facet of the Court’s claim construction inquiry is entirely straightforward, and flows directly from the description of the “mechanism” as disclosed in the specification. In particular, the specification describes this “mechanism” as “rotating] in response to the rectilinear movement of the locating pin ... to move the fingers ... radially.” (Defendant’s App’x, Ex. D, '254 patent at 5:67-6:2.) The specification then discloses the structural elements that achieve this function: The mechanism 68 includes a central post 70 disposed between the actuator 52 at a first end 72 and the fingers 60 at a second end 74 .... The central post 70 rests on a surface 76 of the coupler plate 56, which rectilinearly moves the central post 70 in response to the rectilinear movement of the actuator 52. The central post 70 rotates in response to the rectilinear movement. The surface 76 of the coupler plate 56 in contact with the central post 70 functions as a thrust bearing to facilitate the rotational movement of the central post 70 ...: A motion converter 84 converts the rotational movement of the central post 70 into radial movement of the fingers 60. As shown in FIG. 7, the converter 84 includes the slots 64 in each of the fingers 60 and dowels 86 extending axially from the second end 74 of the central post 70 and into each of the slots 64, respectively. The dowels 86 are offset from the axis A for radially moving the fingers 60 in response to rotational movement of the central post 70 .... The rotational movement of the central post 70 moves the dowels 86 along an arcuate path. As the dowels 86 move through the respective slots 64, which are straight, the dowels 86 force the fingers 60 to move radially to maintain the slots 64 in alignment with the dowels 86 .... ... [A] pair of cams 90 and corresponding cam followers 92 interconnect the central post 70 and the body 16 for rotating the central post 70 in response to the rectilinear movement of the locating pin 12. The pair of cams 90 and the corresponding cam followers 92 are disposed on opposite sides of the axis A. The pair of cams 90 and corresponding cam followers 92 stabilize the central post 70 to allow the central post 70 to rotate smoothly within the cavity 18. (Id. at 6:3-55.) Whether in its response to Defendant’s motion or through the arguments of its counsel at the November 29 hearing, Plaintiff has failed to identify any specific respect in which Defendant’s proposed construction of claim l’s means-plus-function limitation impermissibly imports either (i) functional limitations that are not recited in the claim itself or (ii) structural limitations that are unnecessary to perform the claimed function. Instead, Plaintiff has focused its arguments almost exclusively upon the threshold question whether the term “mechanism” as used in claim 1 warrants means-plus-fnnction treatment under § 112 ¶ 6. Having resolved this more general question in Defendant’s favor, the Court adopts Defendant’s construction of the claim’s means-plus-function limitation as essentially unopposed. B. The Parties’ Cross-Motions for Summary Judgment 1. The Standards Governing the Parties’ Cross-Motions Through the remaining two cross-motions pending before the Court, each party seeks summary judgment in its favor as to the question whether Defendant’s products infringe the two patents-in-suit. In addition, Plaintiff seeks summary judgment in its favor as to the willfulness of Defendant’s alleged infringement of the patents-in-suit, and Defendant, in turn, seeks summary judgment in its favor as to the invalidity of the asserted claims of the '254 patent on various grounds. Under the pertinent Federal Rule, summary judgment is proper “if the pleadings, depositions, answers to interrogatories, and admissions on file, together with the affidavits, if any, show that there is no genuine issue as to any material fact and that the moving party is entitled to judgment as a matter of law.” Fed.R.Civ.P. 56(c). Three 1986 Supreme Court cases — Matsushita Electrical Industrial Co. v. Zenith Radio Corp., 475 U.S. 574, 106 S.Ct. 1348, 89 L.Ed.2d 538 (1986), Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 106 S.Ct. 2505, 91 L.Ed.2d 202 (1986), and Celotex Corp. v. Catrett, 477 U.S. 317, 106 S.Ct. 2548, 91 L.Ed.2d 265 (1986) — ushered in a “new era” in the federal courts’ review of motions for summary judgment. These cases, in the aggregate, lowered the mov-ant’s burden in seeking summary judgment. As stated in Celotex: In our view, the plain language of Rule 56(c) mandates the entry of summary judgment, after adequate time for discovery and upon motion, against a party who fails to make a showing sufficient to establish the existence of an element essential to that party’s case, and on which that party will bear the burden of proof. Celotex, 477 U.S. at 322, 106 S.Ct. 2548. After reviewing the above trilogy of cases, the Sixth Circuit adopted a series of principles governing motions for summary judgment. These principles include: * The movant must meet the initial burden of showing “the absence of a genuine issue of material fact” as to an essential element of the non-movant’s case. This burden may be met by pointing out to the court that the respondent, having had sufficient opportunity for discovery, has no evidence to support an essential element of his or her case. * The respondent cannot rely on the hope that the trier of fact will disbelieve the movant’s denial of a disputed fact, but must “present affirmative evidence in order to defeat a properly supported motion for summary judgment.” * The trial court no longer has the duty to search the entire record to establish that it is bereft of a genuine issue of material fact. * The trial court has more discretion than in the “old era” in evaluating the respondent’s evidence. The respondent must “do more than simply show that there is some metaphysical doubt as to the material facts.” Further, “[wjhere the record taken as a whole could not lead a rational trier of fact to find” for the respondent, the motion should be granted. The trial court has at least some discretion to determine whether the respondent’s claim is plausible. Street v. J.C. Bradford & Co., 886 F.2d 1472, 1479-80 (6th Cir.1989); see also Nemberg v. Pearce, 35 F.3d 247, 249 (6th Cir.1994). The Court will apply these standards in resolving the parties’ cross-motions for summary judgment. 2. Defendant’s Clamp II Does Not Infringe the '478 or '254 Patents, Whether Literally or Under the Doctrine of Equivalents. As the principal ground advanced in its cross-motion for summary judgment, Defendant argues that its “PHD Series PLC Clamp II” product (“Clamp II”) does not infringe either of the two patents-in-suit, whether literally or under the doctrine of equivalents. In support of this contention, Defendant first points to Plaintiffs apparent concession that this clamp does not infringe the '478 patent. Defendant further contends that this product does not infringe the '254 patent as properly construed, where its Clamp II lacks the “mechanism” that is recited in the asserted claims of this patent — namely, a mechanism that features a rotating central post that causes the device’s clamping fingers to move radially into and out of the locating pin in response to the rotational movement of the central post. As discussed below, the Court agrees on both scores. a. The Law Governing the Court’s Infringement Inquiry This Court’s infringement inquiry is governed by a two-step analytical framework. See Ethicon Endo-Surgery, Inc. v. United States Surgical Corp., 149 F.3d 1309, 1315 (Fed.Cir.1998); Kahn v. General Motors Corp., 135 F.3d 1472, 1476 (Fed.Cir.1998). First, the pertinent claims must be construed to determine their meaning and scope. See Ethicon Endo-Surgery, 149 F.3d at 1315. To the extent necessary in this case, the Court already has performed this task in response to Defendant’s motion for claim construction. Next, the claims as construed must be compared to the accused device or system. Ethicon Endo-Surgery, 149 F.3d at 1315. To establish literal infringement, the plain-r tiff must demonstrate by a preponderance of the evidence “that every limitation in the claim is literally met by the accused device.” Kahn, 135 F.3d at 1476. Alternatively, under the doctrine of equivalents, the plaintiff may establish infringement by demonstrating that “there is ‘equivalence’ between the elements of the accused product or process and the claimed elements of the patented invention.” Kahn, 135 F.3d at 1478 (internal quotation marks and citations omitted). The Federal Circuit has somewhat refined this general infringement inquiry to address the specific context of means-plus-function limitations. In particular, “[l]iteral infringement of a means-plus-function claim limitation requires that the relevant structure in the accused device perform the identical function recited in the claim and be identical or equivalent to the corresponding structure in the specification.” Applied Medical Resources, 448 F.3d at 1333. “Once the relevant structure in the accused device has been identified, a party may prove it is equivalent to the disclosed structure by showing that the two perform the identical function in substantially the same way, with substantially the same result.” 448 F.3d at 1333. “Structural equivalence under § 112, ¶ 6 is met only if the differences are insubstantial.” Odetics, Inc. v. Storage Technology Corp., 185 F.3d 1259, 1267 (Fed.Cir.1999) (citation omitted). b. Defendant’s Clamp II Lacks the Rotating Central Post That Is Included as a Limitation in Both of the Patents-in-Suit. Turning first to the claim that Defendant’s Clamp II infringes the '478 patent, no extended analysis is necessary to resolve this question. Rather, as Defendant correctly observes, the individual designated as Plaintiffs representative under Fed. R.Civ.P. 30(b)(6), Joseph Pavlik, admitted at his deposition that Clamp II does not infringe the '478 patent: Q: All right. It’s your view that the second design [i.e., Clamp II], or the company’s view, that the second design infringes the 4[78] and 254 patents? A: No. It only infringes the 254, from what I’ve seen. Q: As you understand it, the second design does not include a mechanism for rotating in response to rectilinear motion as required by— A: Correct. Q: —478? A: Correct. sfc Q: .... You know sitting here today that the product that PHD has in the marketplace ... does not have a mechanism for rotating, causing the fingers to move in a linear fashion, correct? A: That’s correct. (Defendant’s App’x, Ex. H, Pavlik Dep. at 116-17.) Plaintiff does not contend otherwise in its response to Defendant’s motion, or elsewhere in its present round of briefing. Accordingly, Defendant is entitled to summary judgment in its favor as to the claim that its Clamp II product infringes the '478 patent. The infringement analysis as to the '254 patent is not much more complex, in light of Plaintiffs election to largely forgo any sort of alternative arguments in the event that the Court might conclude — as it has now done — that claim 1 of this patent recites a means-plus-function limitation that in turn requires a rotating central post (or its equivalent). As to the first prong of this analysis in the context of a means-plus-funetion limitation, Defendant does not dispute that the “mechanisms” in claim 1 and in Defendant’s Clamp II product perform the same function as recited in the claim — namely, moving the clamping fingers along a straight line into and out of the locating pin in a direction perpendicular to the axis along which the locating pin travels, in response to the rectilinear movement of the locating pin. Accordingly, the key question in the Court’s literal infringement inquiry is whether the relevant structure that performs this function in Defendant’s Clamp II product is “identical or equivalent to” the corresponding structure in the '254 patent specification. Applied Medical Resources, 448 F.3d at 1333. In lieu of addressing this question in its response to Defendant’s summary judgment motion, Plaintiff instead revisits the central issue implicated by Defendant’s motion for claim construction — namely, the proper interpretation of claim 1 of the '254 patent. In particular, Plaintiff again contends that Defendant’s Rule 30(b)(6) designate, Mr. Davenport, effectively “admitted” literal infringement through his deposition testimony acknowledging that Defendant’s Clamp II has a “mechanism” that performs the function recited in claim 1. As explained earlier, however, Mr. Davenport was not asked to offer his construction of claim 1, but was merely asked about the features of Defendant’s products. Indeed, it is precisely because the term “mechanism” is generic — thereby triggering, as the Court has explained, means-plus-function treatment of this element of claim 1 — that Mr. Davenport’s testimony regarding the common functions disclosed in claim 1 and performed by Defendant’s Clamp II has no legal significance to the structural equivalence inquiry now before the Court. Plaintiff fares no better in its appeal to the patent examiner’s stated reasons for allowance of the earlier '478 patent. Specifically, the patent examiner stated: 1. The following is an examiner’s statement of reasons for allowance: A locating and clamping assembly having a body with an internal cavity and an opening; a locating pin; an actuator; and at least one finger in combination with the other claimed limitations. 2. The prior [art] has fingers that rotate which is different from radial movement .... Rotates turns about an axis and radial or radius is a line segment fixed to a point. The radial term shows how the fingers extend in a linear path from the center and not a rotational path as shown in the prior art. These limitations are neither anticipated nor rendered obvious by the prior art by being shown nor suggested. (Plaintiffs Response, Ex. F, 4/22/2004 Reasons for Allowance at 1.) Plaintiff reasons that because the patent examiner allowed the earlier '478 patent without mentioning the rotational movement that was expressly recited in claim 1 of this patent, it follows that such rotational movement could not have been necessary to the pat-entability of the subsequent '254 patent. There are a number of problems with this argument. First, and as Defendant correctly observes, Plaintiff fails to account for or explain the patent examiner’s explicit reference to “the other claimed limitations” in stating the reasons for allowance. These “other claimed limitations” include, of course, the “mechanism for rotating” that is expressly disclosed in claim 1 of the '478 patent. Moreover, nothing in the patent examiner’s statement purports to express any opinion as to whether the term “mechanism” in the '478 patent might trigger means-plus-function treatment — and, needless to say, the examiner was in no position to interpret the term “mechanism” in the not-yet-filed application for the '254 patent. Finally, even if the patent examiner had expressed a view on the claim construction issue presented in this case, the Court would not be bound by it. See SRAM Corp. v. AD-II Engineering, Inc., 465 F.3d 1351, 1359 (Fed.Cir.2006). Accordingly, the reasons for allowance of the '478 patent provide no basis for the Court to revisit the claim construction it adopted earlier. Neither is the Court persuaded by the generalized assertion of Plaintiffs counsel at the November 29 hearing that Defendant has impermissibly consulted the '254 patent specification to the “n-th detail” in identifying the structure corresponding to the “mechanism” recited in claim 1. As Plaintiff observes, the Court’s claim construction cannot stand to the extent that it “defin[es] a claimed function to require more than is actually claimed” or fails to restrict the corresponding structure to that which is necessary to perform the claimed function. Applied Medical Resources, 448 F.3d at 1334. Yet, one need not venture far into the patent specification here to find the key structural component relied upon by Defendant. To the contrary, the very first detail that is disclosed about the “mechanism” is that it “includes a central post,” and one need not read much further before learning that this central post “rotates in response to the rectilinear movement” of the actuator that moves the locating pin. ('254 patent at 6:3-11.) Absent this rotating central post, the specification does not describe any means by which to carry out the function of moving the device’s clamping fingers perpendicularly into and out of the locating pin in response to the movement of the locating pin. Nor did Plaintiffs counsel explain at the November 29 hearing how a claim construction that includes this feature might impermissibly broaden the function claimed for the “mechanism,” or what sort of structure might be gleaned from the patent specification that would lack a rotating central post yet still perform the claimed function. Under these circumstances, the Court is confident that