Full opinion text
OPINION MEANOR, District Judge. This is an action asserting infringement of United States Patents No. 3,261,508 (“508 Patent”) and No. 3,173,583 (“583 Patent”) and for an accounting for profits and damages arising therefrom. Plaintiffs are Eugene A. Wahl and Vibra Screw, Inc. Wahl is president of Vibra Screw, Inc. and owner and patentee of the ’583 Patent issued March 16, 1965 and the ’508 Patent issued July 19,1966. (Complaint ¶ 5.) Vibra Screw, Inc. is a corporation of New Jersey and is the exclusive United States licensee under the two patents. (Complaint ¶ 5; Admitted in ¶ 5 of the Answer.) By virtue of such licensee arrangement, it is alleged and uncontested that Wahl is receiving a royalty from Vibra Screw of 2V2% of the net sales price of all patented devices sold by Vibra Screw. Defendant Rexnord, Inc. is a corporation of Wisconsin. Wahl charges, inter alia, that Rexnord, Inc. is making, using and offering for sale vibratory bin activators embodying the inventions described and claimed in the ’508 and ’583 Patents. Rexnord counterclaimed for recovery of damages and other appropriate relief on account of alleged antitrust violations pursuant to 15 U.S.C. §§ 1 and 2. Defendant maintains that plaintiffs filed patent infringement claims in Idaho for no other purpose but to harass Rexnord and potential customers thereof in the sale of vibrating bin bottoms. Furthermore, defendant contends that Wahl and Vibra Screw engaged in a conspiracy in restraint of trade via the maintenance of unfounded patent infringement litigation, thereby promoting the sale of Wahl’s bin activators and discouraging prospective purchasers from buying such equipment from others. Wahl, on May 2, 1978, in response to Rexnord’s counterclaims, moved for summary judgment with respect to the Sherman Act, §§ 1 and 2 violations. Rexnord responded with a summary judgment motion seeking a ruling that there was no patent infringement of the ’508 patent ‘by the Rexnord vibratory bin activator. Rexnord asserts that there was double patenting between the ’508 Patent and Wahl’s design Patent No. 202,068 (“068 Patent”), thereby invalidating the ’508 Patent. Finally, Wahl moved for a summary judgment to the effect that the ’508 Patent was not invalid for double patenting. This court has subject matter jurisdiction pursuant to 28 U.S.C. § 1338 and venue is proper in this court under 28 U.S.C. § 1400(b). I. DEFENDANT’S MOTION FOR SUMMARY JUDGMENT WITH RESPECT TO THE ISSUE OF DOUBLE PATENTING IS GRANTED. The defendant, Rexnord, argues that the ’508 utility patent is invalid for double patenting in view of the ’068 design patent. The material-receiving member of the bin promoter as shown in the design patent is the same as that shown in the ’508 Patent. See diagrams of the ’068 and ’508 Patents, infra. Plaintiffs, on the other hand, maintain that the design patent does not show the internal configuration of the material-receiving member, and, therefore, it is inappropriate to conclude that the bin activator of the ’068 design patent has a plurality of concave surfaces as called for by the claims of the ’508 utility patent. Patent ’068 is a design patent and claims “the ornamental design for a storage bin flow promotor as shown and described.” Such patent was issued on August 24, 1965 for a period of 14 years. Its exclusive licensee is plaintiff, Vibra Screw, Inc. The ’068 design patent includes the following diagrams: The utility ’508 Patent was subsequently issued to Eugene Wahl on July 19, 1966 for a term of 17 years. Its exclusive licensee is also Vibra Screw, Inc. The ’508 Patent claims a vibratory storage bin activator apparatus with the emphasis primarily on the internal configuration of the interior surfaces and on the means for vibrating the material. In particular, the claims of the ’508 Patent call for a plurality of concave surfaces for the bottom walls of the bin activator in order to promote the flow of material from the storage bin and to arrange for effecting a positive discharge of the material though an outlet opening, Such flow is insured via the vigorous vibrations of the gyrator at the bottom of the bin which agitates fibrous, sticky material, e. g., wet sand, clay, wood chips, etc., having the tendency to interrupt the continuous discharge of material from the storage bin. The utility patent includes the following diagrams: Under the judicially created doctrine of double patenting, a prior design patent can invalidate a latter issued utility patent. See Application of Thorington, 418 F.2d 528, 57 C.C.P.A. 759 (1969), cert. denied, 397 U.S. 1038, 90 S.Ct. 1356, 25 L.Ed.2d 649 (1970). The doctrine was created to prevent the extension, beyond its lawful limits, of the patent monopoly. See J. R. Clark Co. v. Jones & Laughlin Steel Corp., 288 F.2d 279 (7th Cir.), cert. denied, 368 U.S. 828, 82 S.Ct. 49, 7 L.Ed.2d 32 (1961). The patent laws, of course, provide that a design patent and a utility patent may well be issued on the same construction. See 35 U.S.C. § 101 (utility), § 171 (design). However, each such patent must claim a separate, distinct patentable invention. Ropat Corp. v. McGraw-Edison Co., 535 F.2d 378 (7th Cir. 1976); In re Barber, 81 F.2d 231 (Cust. & Pat.App.1936). More specifically, in the words of the Supreme Court, the later patent “must be something substantially different from that comprehended in the first patent. It must consist in something more than a mere distinction of the breadth or scope of the claims of each patent.” Miller v. Eagle Mfg. Co., 151 U.S. 186, 198, 14 S.Ct. 310, 315, 38 L.Ed. 121 (1894). The Ropat court, in particular, had occasion to deal with such a situation. There, the first-to-issue design patent claimed an ornamental design for a corn popper. The utility patent called for a corn popper primarily composed of a base and heating element. The dome cover was described as possessing a volume substantially greater than that of the pan so that the corn rises and fills as it is popped. Patentee Ropat brought suit against various defendants for infringement of the utility patent. The defendants raised the defense of “double patenting” and moved for summary judgment, arguing that both patents claimed the same invention and that the utility patent invention was inherently in the design patent. The Seventh Circuit pointed out that when a double patenting situation involves a design and utility patent, it is not easy to compare utility word claims with design picture claims in determining whether the same invention is claimed. The mere use of the same design claimed in the design patent as the vehicle for describing the utility claimed in the utility patent is not dispositive when comparing such claims. 535 F.2d at 381; Anchor Hocking Corp. v. Eyelet Specialty Co., 377 F.Supp. 98, 101 (D.Del. 1974). The pertinent test, therefore, for determining whether the utility and design patent claim the same invention was set forth as follows: . [D]ouble patenting exists if the feature in which the novel esthetic effect resides is the identical feature which produces the novel function so that a structure embodying the mechanical invention would of necessity embody the design, and vice versa. 535 F.2d at 381. See In re Hargraves, 53 F.2d 900 (Cust. & Pat.App.1931); Application of DuBois, 262 F.2d 88, 46 C.C.P.A. 744 (1958). Thereupon, the Ropat court held that the “novel feature” constituting the design claimed in the design for the popcorn popper is the large flattop dome cover, the volume of which is greater than that of the cooking pan in the base. This novel design feature clearly produces the novel “pop-flip-serve” function which forms the essence of the utility patent claim. The patentee in Ropat insisted that the district court read into the design patent a feature not claimed or described, namely, a shallow cooking pan in the base. Since neither the cooking vessel nor its volume were claimed or disclosed in the design patent, one would not know whether the volume of the dome was greater than the cooking vessel. However, Judge Castle pointed out that a design patent and a utility patent need not claim every incidental feature of the other in order for both to claim the “same invention.” Moreover, he stated: A design patent is granted pursuant to 35 U.S.C. § 171 on an article of manufacture as well as for a distinctive design. Being a corn popper, the article of manufacture present in the design patent here must necessarily possess a cooking vessel and heating element in its base. . Regardless of the exact volume of the cooking pan in the popper claimed in the design patent, it readily appears from the design patent that its volume necessarily would be less than that of the dome. 535 F.2d at 382. (Emphasis supplied; citation omitted.) The Seventh Circuit thereupon found that a person following the design patent would clearly infringe Ropat’s utility patent since it would be capable of functioning in the precise manner as claimed in the design patent and held the utility patent invalid for double patenting. In the instant case, patentee Wahl argues that the two conditions of the relevant test as set forth by the Ropat court in order to find double patenting have not been met. First, a structure made in accordance with the claims of the utility patent must “of necessity” embody the claim of the design patent and, secondly, a structure made in accordance with the claim of the design patent must “of necessity” embody the claims of the mechanical patent. The Wahl design patent is directed solely to an ornamental exterior surface configuration of a flow promotion device, while the utility patent is directed to a combination of elements including a claimed interior surface configuration of a bin discharging device. The interior surfaces of the material-receiving member of the design patent cannot be seen on the design drawing. The internal configuration, Wahl insists, is not part of the design patent claim. In order to read the utility patent claims on the apparatus illustrated in the design patent drawing, it must be assumed that the internal wall configuration of a structure made in accordance with the design patent drawing follows the external wall configuration. The affidavit of patent expert Elliot makes, clear that a bin discharging device embodying the exterior surface configuration of the design patent could include interior surface configuration other than the plurality of concave surfaces claimed in the utility patent. (Elliot affidavit, exhibits II, III.) Accordingly, a structure embodying the design invention does not “of necessity” embody the utility invention and, thus, there is no double patenting. Wahl’s contentions are unpersuasive. He misconstrues the test set forth by the Seventh Circuit in Ropat by stretching the common sense meaning of the phrase “of necessity.” That court set forth two conditions, either of which satisfies its test for double patenting. The issue, therefore, becomes whether the features in which the novel esthetic effect resides are the identical features which produce the novel function claimed in the utility patent. The novel features of the design patent are the outside proportions and the exterior configuration thereof, which produce a plurality of convex exterior surfaces for the bottom walls of the storage bin promoter. This novel design feature clearly produces the novel interior configuration which forms surfaces of the dish-shaped sides, resulting in a positive discharge of material through the outlet when the gyrator is operating, while at the same time preventing discharge of material when the gyrator is not operating. Such construction facilitates the movement of material down from the upper regions of the storage bin and alleviates the congestion and packing of material at the bin discharge opening, thereby assuring a positive and uniform flow. Wahl insists, however, that all the elements recited in the utility patent claims are not found in the structure of the design patent. This argument is unpersuasive. Double patenting in the design-utility situation cannot turn on the niceties of precise ornamentation, see e. g., Application of DuBois, supra, 262 F.2d at 90-91, 46 C.C.P.A. 744, but rather must turn on the presence or absence of design features which produce the novel function claimed in the utility patent. As the Ropat court pointed out, “[a] design patent and a utility patent need not claim every incidental feature of the other in order to claim the ‘same invention.’ ” 535 F.2d at 382. Moreover, 35 U.S.C. § 171 authorizes the patenting of a design patent on an article of manufacture, e. g., a storage bin promoter, and not just on appearance. See Application of Thorington, supra, 418 F.2d at 537. In Thorington, for example, the U.S. Court of Customs and Patent Appeals found double patenting of a fluorescent lamp even though the patentee argued that the design patent protected only ornamental design, while the claims of the utility patent were directed to the exact structure and function of the lamp. Such claims required the cooperation of certain elements, namely, an electrode, a phosphor coating, an ionizable medium and starting gas, and an envelope of vitreous material, not shown or covered by the design patent. The court rejected the argument. The design patent protected an article of manufacture, e. g., a fluorescent lamp, embodying the ornamental configuration under 35 U.S.C. § 171. Thereupon, the court did not find the difference between the two patents significant and accepted the principle that double patenting is a proper ground for rejection where the features producing the novel aesthetic effect of a design patent are the same as those recited in the claims of a utility patent. Accordingly, the pertinent claims of the utility patent were held invalid. The same principal was recently enunciated in Transmatic Inc. v. Guiton Industries, Inc., 442 F.Supp. 911 (E.D.Mich.1977). The design patent in question set forth that the dominant features of the design, i. e., an ornamental design for a lighting fixture, reside in the portions shown in full lines. The lens portion was shown in full lines while the lighting source and reflector were shown in dotted lines. On this basis, the patentee asserted that the invention claimed in the design patent was, therefore, only the lens feature. The invention claimed in the utility patent, on the other hand, was the lighting fixture as a whole, including the positioning of the light source and the shape of the reflector surface. The court was unpersuaded and noted, in accordance with Ropat, that the claim in a design patent is on an article of manufacture, here a lighting fixture. Judge Kennedy found that the claim in the design patent was for a lighting fixture and included the entire drawing, at least to the extent of a light source and a reflecting back. Thereupon, the court held the utility patent invalid for double patenting. In the instant case, the design patent only sets forth an outer appearance apart from the detail of the bin’s function and structure which is set forth in the utility patent. This difference is not significant. The design patent protects an article of manufacture, here a bin discharging device, embodying the ornamental configuration. 35 U.S.C. § 171. Such bin has a well defined meaning which necessarily includes those elements recited in the ’508 Patent. In particular, the article of manufacture present in the design patent must necessarily possess a sloping interior configuration, i. e., a plurality of concave surfaces forming downward-sloping dish-shaped sides in order to assure a positive flow and uniform discharge of material. Once the design patent expires, the public should be free to construct bin discharging devices without restraint by the claims of the utility patent. Although Wahl argues that a bin discharging device embodying the exterior surface configuration of the design patent could include an interior configuration other than the plurality of concave surfaces claimed in the utility patent, this court notes that this appears to be an unrealistically strained effort to produce a bin that conforms to the illustration in the ’068 Patent but not to the ’508 Patent. The hypothetical interior configurations set forth in the Elliot affidavit are not commercially feasible in view of the function of an efficient storage bin discharging device, i. e., to assure a positive and uniform flow of material (Elliot affidavit, exhibits II, III). Prom a practical standpoint, it is clear that a person following the design patent as shown in the drawings would clearly infringe the utility patent since one manufacturing a bin discharging device following the drawing of the design patent would have a bin capable of functioning in the precise manner claimed in the utility patent, unless extraordinary and unnecessary steps were taken to see to it that the interi- or configuration did not parallel the exteri- or surface. Accordingly, under the mandate of Ropat and Thorington, since the novel design feature claimed in the first-to-issue design patent produces the novel function claimed in the later-issued utility patent, utility Patent No. 3,261,508 is invalid due to double patenting over design Patent No. 202,068. The summary judgment motion is hereby granted. II. DEFENDANT’S MOTION FOR SUMMARY JUDGMENT ON THE ISSUE OF NON-INFRINGEMENT IS DENIED. Rexnord strenuously argues that claims 1 through 4 of the Wahl ’508 Patent cannot be read upon the Rexnord device. Such claims all call for “a plurality of concave surfaces” on the material-receiving member. The Rexnord bin activator, on the other hand, does not have a “plurality of concave surfaces.” The bottom wall of defendant’s bin activator consists of two cones welded together and having planar surfaces, cones being of slightly different degrees of slope. Since there are not concave surfaces in Rexnord’s structure, there can be no infringement. See Diagrams of the Rexnord Bin Activator, infra, attached hereto as Appendix A. Wahl maintains that there is disagreement as to the nature of the surface in the Rexnord device. In particular, defendant’s expert, Fischer, contends that the term “concave” by definition is limited to accurate surfaces, not including cones. (Fischer Deposition pp. 26, 27) Defendant’s engineer Schrader describes the exterior concave surfaces of defendant’s structure as being convex when viewed from the outside and concave when viewed from the inside. (See Plaintiff’s Exhibit 17 attached to transcript of the Schrader Deposition set forth in the Hubley Affidavit filed Sept. 1, 1978.) However, plaintiffs’ expert, Hubley, a mathematician for 31 years, clearly disagrees with Fischer’s statement that the “definition that a concave surface is a surface not generated by a straight line” is “in every analytical geometry book I’ve ever seen.” (Fischer Deposition p. 26.) After reviewing 26 such textbooks, Hubley did not find one containing the definition as Fischer so ascribed. Hubley, thereupon, asserted that since the interior of a cone is by nature concave, it would have been a gross inaccuracy for any analytical geometry textbook to present such a definition as Fischer’s. (Second Hubley Affidavit p. 2.) Accordingly, Wahl concludes that there is a genuine dispute of fact as to the nature of the surfaces of defendant’s structure. . This court recognizes that in order for there to be infringement, the substance of the invention disclosed and claimed in the patent must be incorporated in the units accused of infringing the patent. Hall v. U. S. Fiber Plastics Corp., 341 F.Supp. 978, 986 (D.N.J.1971), appeal dismissed as moot, 476 F.2d 418 (3d Cir. 1973). To infringe, the accused device must be substantially identical in structure, mode of operation, and results accomplished as the device covered by the patent. Baut v. Pethick Construction Co., 262 F.Supp. 350 (M.D.Pa.1966). In applying this general test of infringement, courts follow a two-step analysis. First, does the accused device literally infringe the patent in question? If not, then second, does the “doctrine of equivalents” nevertheless lead to a finding of infringement? See Baldwin-Lima-Hamilton Corp. v. Tatnall Meas. Sys. Co., 169 F.Supp. 1, 9 (E.D.Pa.1958), aff’d, 268 F.2d 395 (3d Cir.), cert. denied, 361 U.S. 894, 80 S.Ct. 190, 4 L.Ed.2d 151 (1959); Ziegler v. Phillips Petroleum Co., 483 F.2d 858 (5th Cir.), cert. denied, 414 U.S. 1079, 94 S.Ct. 597, 38 L.Ed.2d 485 (1973). First, to determine what the patented invention is, we must turn to the claims of the patent because the scope of every patent is limited to the invention described in the claims, read in the light of the specifications. Motion Picture Patents Co. v. Universal Film Mfg. Co., 243 U.S. 502, 37 S.Ct. 416, 61 L.Ed. 871 (1917). If the accused matter falls clearly within the claim, infringement is made out and that is the end of it. Graver Tank & Mfg. Co., Inc. v. Linde Air Products Co., 339 U.S. 605, 607, 70 S.Ct. 854, 94 L.Ed. 1097 (1950). Secondly, if patents, however, were interpreted only by the literal scope of their claims, minor deviations in the structure of almost any invention could be devised to elude the reach of the patent’s protection. Thus, experience with patent cases demonstrates that seldom may the question of infringement be determined on the literal words of the claim. See Fischer & Porter Co. v. Huskett, 354 F.Supp. 464, 479 (E.D.Pa.1973); Phillips Electronic & Pharmaceutical Industries Corp. v. Thermal & Electronics Industries, Inc., 311 F.Supp. 17, 40 (D.N.J.1970), aff’d, 450 F.2d 1164 (3d Cir. 1971); Independent Pneumatic Tool Co. v. Chicago Pneumatic Tool Co., 194 F.2d 945 (7th Cir. 1952). In other words, patent infringement is not a matter of mere words nor does it depend on the mere application of claim phraseology. See Eigen Mfg. Co. v. Ventfabrics, Inc., 207 F.Supp. 240, 252 (M.D.Pa.1966). In applying this general 1963). In recognition of the fact that a patent would be virtually worthless if it did not protect against devices which incorporate unimportant variations of the patented device, courts developed the “doctrine of equivalents” to protect the patentee from devices that differ merely in name, form or shape from the patented invention, Machine Co. v. Murphy, 97 U.S. 120, 125, 24 L.Ed. 935 (1877), but perform substantially the same function in substantially the same way to obtain the same result. Graver, supra, 339 U.S. at 608, 70 S.Ct. 854; Burgess Cellulose Co. v. Wood Flong Corp., 431 F.2d 505, 507 (2d Cir. 1970); Deller’s Walker on Patents, supra, § 546. To establish equivalency for the purpose of showing infringement of a patent claim, the patentee has the burden of proving a real identity of means, operation, and result. Foster Cathead Co. v. Hasha, 382 F.2d 761, 765 (5th Cir. 1967), cert. denied, 390 U.S. 906, 88 S.Ct. 819, 19 L.Ed.2d 872 (1968), citing C. Pigott, Equivalents in Reverse, 43 Journal of the Patent Office Society 291-92 (1966). But while substantial identity of function, operation, and result are necessary, the doctrine “does not require complete identity for every purpose and in every respect. In determining equivalents, things equal to the same thing may not be equal to each other and, by the same token, things for most purposes different may sometimes be equivalents.” Graver, supra, 339 U.S. at 609, 70 S.Ct. at 857. Hence, minor variations between the accused structure and the precise language of the claims in question do not prevent a holding of infringement. See Graver, supra; Tokyo Shibura Elec. Co. Ltd. v. Zenith Radio Corp., 404 F.Supp. 547, 572 (D.Del. 1975), aff’d, 548 F.2d 88 (3d Cir. 1977); Samuelson v. Bethlehem Steel Co., 323 F.2d 944 (5th Cir. 1963), cert. denied, 376 U.S. 938, 84 S.Ct. 793, 11 L.Ed.2d 659 (1964). Given the teaching of Walker on Patents and of Graver, this court holds that summary disposition is not appropriate. First, there is a genuine issue of fact whether or not Rexnord’s vibratory bin infringes upon Wahl’s, i. e., plaintiffs’ and defendant’s experts disagree over the correct definition of the term “concave.” Secondly, the issue of equivalency here is too close a call. The Rexnord bin activator “performs substantially the same function in substantially the same way to obtain the same result” as the Wahl vibratory bin activator, differing only in “name, form, and shape.” Graver, supra, 339 U.S. at 608, 70 S.Ct. 854. Moreover, a finding of equivalence is a determination of fact. Proof can be made in any form: through testimony of experts or others versed in the technology; by documents, including texts and treatises; and, of course, by disclosures of the prior art. Like any other issue of fact, final determination requires a balancing of credibility, persuasiveness and weight of the evidence. This is especially true in patent cases where courts generally are unfamiliar with technical factual issues raised and must rely on expert testimony to resolve fact questions. Accordingly, trial by affidavit is no substitute for plenary trial by jury, which so long has been the hallmark of “even-handed justice.” See Poller v. CBA, Inc., 368 U.S. 464, 473, 82 S.Ct. 486, 7 L.Ed.2d 458 (1962). Therefore, the summary judgment motion with respect to the question of non-infringement is hereby denied. III. PLAINTIFFS’ MOTION FOR PARTIAL SUMMARY JUDGMENT WITH RESPECT TO THE ALLEGED SHERMAN SECTION 1 VIOLATION IS GRANTED. Plaintiffs move for summary judgment in response to Rexnord’s counterclaim that Wahl and Vibra Screw have engaged in a conspiracy in restraint of trade against Rexnord via the maintenance of unfounded patent infringement litigation in violation of Sherman § 1. Plaintiffs argue that it is a legal impossibility for Wahl, the licensor, president and sole stockholder of Vibra Screw, to conspire with Vibra Screw, his exclusive licensee under both aforementioned patents charged to be infringed, so as to violate the antitrust laws. Moreover, plaintiffs point out that Wahl cannot act independently of Vibra Screw. For example, in Tycom v. Redactron Gorp. et al., 380 F.Supp. 1183 (D.Del.1974), Chief Judge Latchum held that a patentee is an indispensable party to a patent infringement action by the exclusive licensee. Accord, Rainville Co., Inc. v. Consupak, Inc., et al., 407 F.Supp. 221, 223 (D.N.J.1976). Thus, Vibra Screw, as exclusive licensee under both patents, could not bring an action without joining the patent owner, Eugene A. Wahl. It is a basic principal of antitrust law that a corporation cannot conspire with itself, that is, with its officers, agents, and employees, since the acts of the officers are the acts of the corporation. Nelson Radio & Supply Co. v. Motorola, 200 F.2d 911 (5th Cir. 1952); Goldlawr, Inc. v. Shubert, 276 F.2d 614 (3d Cir. 1960). Nonetheless, Rexnord relies on Handgards, Inc. v. Johnson & Johnson, 413 F.Supp. 921 (N.D.Cal.1975) for the proposition that Wahl can conspire with his own corporation, i. e., Wahl functions with two hats, as patent owner and as president of Vibra Screw, the licensee. In each capacity he acts independently and personally since by virtue of a license agreement with Vibra Screw, Wahl is receiving a royalty from Vibra Screw of 2Vá% of the net sale price of all patented devices sold by Vibra Screw. Defendant’s reliance on Handgards is misplaced. In Handgards, the district court held that a parent corporation could conspire with its subsidiary corporation. It is Goldlawr, instead, which is pertinent to the instant litigation. In Goldlawr, the Third Circuit, relying primarily on Nelson Radio, affirmed the district court’s dismissal of the Sherman § 1 charge that William Goldman, president and owner of the capital stock of William Goldman Theatres, had conspired with William Goldman Theatres to obtain first-run movies to the detriment of plaintiff, Erlanger Theatre. The Third Circuit held, in effect, that a corporation cannot conspire with its officers or agents to violate the antitrust laws. However, this rule does not apply where the agents or officers are “activated by any motives personal to themselves” or are not acting in their “normal capacities.” Nelson Radio & Supply Co., Inc. v. Motorola, Inc., supra, 200 F.2d at 914. In Johnston v. Baker, 445 F.2d 424 (3d Cir. 1971), the Third Circuit suggested comparable limitations on the Nelson rationale. The Johnston court suggested, for example, that Nelson would not apply to a case where some one or more of the defendants “were acting for personal reasons and [where] one of the parties to the conspiracy was not an employee or agent of the corporation.” 445 F.2d at 427. Here, Wahl is receiving, by virtue of a license agreement with Vibra Screw, a 21h% royalty of the net sales price of all patented devices sold by Vibra Screw. It would appear that it is to Wahl’s personal advantage to promote greater sales of bin activators for Vibra Screw, resulting in increased royalties to Wahl. However, Vibra Screw is Wahl’s “exclusive” licensee. His economic interest is coextensive with that of Vibra Screw’s, not apart therefrom. He is not acting independently of Vibra Screw for his own personal benefit, rather he stands to gain only through sales made by Vibra Screw. Since Wahl has made Vibra Screw his exclusive licensee, unless Wahl personally exploits his patent apart from his activity as an officer of Vibra Screw, no one else but Vibra Screw can exercise the patent. Wahl is not exploiting the ’508 Patent individually. Hence, the only economic interest he has in the patent is derived through Vibra Screw. The cases discussed above show that where a corporate officer’s economic interest in an antitrust violation is derived from that of the corporation he serves, he cannot be said to have conspired with it in violation of the antitrust laws. Accordingly, Wahl, as president, cannot conspire with his own company, Vibra Screw. Given the clear mandate of Goldlawr, summary judgment is granted with respect to the alleged Sherman § 1 violation. IV. PLAINTIFFS’ MOTION FOR PARTIAL SUMMARY JUDGMENT WITH RESPECT TO THE ALLEGED SHERMAN SECTION 2 VIOLATION IS DENIED. The thrust of Rexnord’s counterclaim regarding the Sherman § 2 violation is that Wahl and Vibra Screw have initiated an ongoing campaign of unwarranted litigation with respect to the ’583 Patent in order to monopolize the vibratory bin activator market. More specifically, plaintiffs brought patent infringement suits against many of their competitors, i. e., Carrier Manufacturing Co., Vibranetics, Inc., Energy, Inc., J. L. Rosium & Co., Solids Flow Control Corp., and Rexnord, for infringement of the ’583 Patent. The litigation against Vibranetics, Inc., Energy, Inc., J. L. Rosium & Co., Solids Flow Control Corp., and Rexnord was ongoing and/or filed after the ’583 Patent had been declared invalid and after the Supreme Court had rendered its decision in Blonder-Tongue Labs v. University Foundation, 402 U.S. 313, 91 S.Ct. 1434, 28 L.Ed.2d 788 (1971). In Blonder-Tongue, the Supreme Court held that a patentee, whose patent is held invalid in his suit against one alleged infringer, may be precluded, under the doctrine of collateral estoppel, from asserting the validity of the patent in a suit against a different alleged infringer. Accordingly, Rexnord maintains that such litigation has had a chilling impact upon the marketplace, as prospective customers of bin activators are less likely to buy such activators from manufacturers subject to suit for patent infringement. Plaintiffs move for summary judgment here on the ground that the elements necessary to make up a Sherman § 2 violation have been neither pleaded nor proven. Rexnord has not shown that Wahl and Vi-bra Screw possess a dangerous probability of monopolizing the relevant market, i. e., a party with monopoly power has the power to control prices or to unreasonably restrict competition in the relevant market. United States v. DuPont & Co., 351 U.S. 377, 76 S.Ct. 994, 100 L.Ed. 1264 (1956). Plaintiffs first argue that the relevant market is broader than vibrating bin activators. It includes apron conveyors, five different types of feeders, mass flow bins, and the like. Secondly, there is competition in the market. Plaintiffs do not have the size nor capacity to control prices, as their total sales amount to about one percent of Rexnord's. Wahl concludes that there is no issue of genuine fact with respect to the probability of monopolization, the claim of reduced competition by means of patent litigation is frivolous, and, accordingly, summary judgment is appropriate. This court recognizes that the bringing of a series of ill-founded patent infringement actions in bad faith, can constitute an antitrust violation in and of itself, if such suits are initiated or pursued with an intent to monopolize a particular industry and the other elements of a § 2 violation are present. Otter Tail Power Co. v. United States, 410 U.S. 366, 93 S.Ct. 1022, 35 L.Ed.2d 359 (1973); California Motor Transport Co. v. Trucking Unlimited, 404 U.S. 508, 92 S.Ct. 609, 30 L.Ed.2d 642 (1972); Handgards, Inc., supra, 413 F.Supp. at 924-925. However, this type of antitrust violation is a very difficult one to prove. Crown Machine & Tool Co. v. KVP — Sutherland Paper Co., 297 F.Supp. 542 (N.D.Cal. 1968), aff’d, 409 F.2d 1307 (9th Cir. 1969). Moreover, this court recognizes that control of price or competition establishes the existence of monopoly power under § 2. United States v. Du Pont & Co., supra, 351 U.S. at 393, 76 S.Ct. 994. Given the mandate of Poller v. CBS, Inc., supra, that summary judgment in antitrust actions should be employed sparingly, particularly where motive and intent are at issue, summary judgment is not proper at this time. There is a genuine factual dispute with respect to the relevant market, plaintiffs’ ability to control prices, and plaintiffs’ motive and intent in initiating the multiplicity of patent infringement suits with its effect thereupon the marketplace. It is for the trier of fact to determine whether plaintiffs’ ongoing litigation has had such a chilling impact upon the marketplace, i. e., purchasers of bin activators are more likely to buy or have been buying bin activators from a manufacturer not subject to infringement suits so as to reduce competition and to give Wahl a monopoly position in the market. Accordingly, under any reasonable construction of the facts in evidence and under any acceptable theory of law, the party opposing the motion, Rexnord, might be entitled to prevail. Scooper Dooper, Inc. v. Kraft Co., 494 F.2d 840, 848 (3d Cir. 1974). Therefore, the summary judgment motion in regard to the Sherman § 2 charge is denied. This invention relates to bin activator apparatus and more particularly to apparatus adapted for attachment to a storage bin, or hopper, to promote a positive flow of material therefrom. The hoppering problem, that is, the problem of providing a positive, continuous flow of most solids from storage bins, has been, for many years, a vexing and costly bottleneck in continuous or automated processing applications. Wherever solids must be moved from storage into a process, the first step in the process, namely, the continuous discharge of the material from the storage bin, heretofore has defied the most varied and expensive methods for bringing this about. The problem is complex because it involves many variable factors, such as the size, shape and character of the particular material, temperature, humidity, etc. Fibrous, sticky, and the like, materials have a tendency to bridge across even very large horizontal distances. A further problem is the stagnation of the material around the bin walls with the material toward the center of the bin moving out preferentially and resulting in what is commonly called “rat-holing.” It has been estimated that industry loses many millions of dollars each year because of process interruptions due to faulty flow of the material out of the storage bin. Additionally, many millions of dollars have been spent in seeking a solution to the problem. The design of storage bins, per se, has been the subject of extensive and thorough research, both mathematical and empirical. However, experts in this field have found that in spite of the best bin designs, a dependable outflow of the material cannot be obtained without the use of auxiliary devices operatively associated with the bin. Many auxiliary devices and arrangements have been proposed to promote the flow of material from a storage bin, including vibrators mounted to the exterior surface of the bin, multiple screw conveyors arranged across the bottom of the bin, sweep arms operating as giant agitators within the bin, pulsating pads disposed along the inner wall of the bin, etc. While heretofore known devices and arrangements are each satisfactory for use under limited conditions and with certain materials, none has proven to be satisfactory for use with really difficult-to-handle materials, such as, for example, wet sand, clay, wood chips, etc. The present invention overcomes the shortcomings of the prior devices of this class. The apparatus is adapted for vibratory attachment to the bottom of a storage bin. Such apparatus is subjected to vigorous vibration and includes means for vigorously agitating the material at the critical point, namely, in the region of the discharge opening of the bin. An object of this invention is the provision of apparatus adapted for use with a storage bin, or hopper, which apparatus is constructed and arranged to provide a positive discharge of the material from the bin. An object of this invention is the provision of apparatus for attachment to a storage bin, which apparatus includes means for vigorously agitating the material in the region of the bin discharge opening, and means for controlling the converging flow of the material from the hopper and through an outlet opening provided in the apparatus. An object of this invention is the provision of apparatus for promoting flow of material from a storage bin, which apparatus is constructed and arranged for effecting a positive discharge of the material, through an outlet opening at a relatively uniform rate during the time that the apparatus is vibrated, and for arresting such discharge of the material when the apparatus is not vibrated. An object of this invention is the provision of apparatus for attachment to the bottom of a storage bin having a discharge opening at the bottom, which apparatus comprises material-receiving means having concave side walls terminating in an outlet opening, means forming an annular opening defining a flow path for the material from the bin into the material-receiving means, means for imparting vibrations to the apparatus and means for attaching the apparatus in operative position to the bin. An object of this invention is the provision of bin activator apparatus vibrationally attached to a storage bin, which apparatus comprises a bottom wall formed of a plurality of concentrically-arranged, concave members leading to an output opening, baffle means spaced from the outlet opening, and a gyrator for imparting vigorous vibrations to the apparatus. These and other objects and advantages of the invention will become apparent from the following description when taken with the accompanying drawings. It will be understood, however, that the drawings are for purposes of illustration and are not to be construed as defining the scope or limits of the invention, reference being had for the latter purpose to the claims appended hereto. In the drawings wherein like reference characters denote like parts in the several views: FIGURE 1 is a top plan view of apparatus made in accordance with this invention, with a portion of the baffle member broken away; FIGURE 2 is a side, elevational view thereof, with a portion of the side walls of the concave members broken away; FIGURE 3 is a side elevational view showing the apparatus attached to a storage bin, and drawn to a reduced scale; and FIGURE 4 is an enlarged, fragmentary, view showing the apparatus attached to the storage bin, with certain parts shown, in cross-section. Reference, now, is made to FIGURES 1 and 2 showing bin activator apparatus made in accordance with this invention. Such apparatus comprises the two metal, dish-shaped members 10 and 11 and a tubular member 12, said members being concentrically arranged and welded together to form a rigid, unitary structure. The base ends of the dish-shaped members 10 and 11 include cylindrical sections of relatively short axial' lengths, such sections being identified by the numerals 13 and 14, respectively. It may here be pointed out that the dish-shaped members are obtainable as stock items, in various sizes and contours, thereby affording manufacturing economy, in addition to other advantageous features, as will be described hereinbelow. In the manufacture of the bin activator apparatus, the bottom of the dish-shaped member 10 is cut out along a desired plane to provide a central opening accommodating the cylindrical portion of the associated dish-shaped member 11 and the two members are welded together along the common circle, as indicated by the weld 15. Similarly, a central hole is cut in the dish-shaped member 11 to accommodate the tubular member 12, these members also being welded together as indicated by the numeral 16. Thus, the members 10, 11 and 12 form an integral assembly with the opening 17 constituting the outlet opening for the discharge of such material as may be contained within the members 10 and 11. The concave, contour of these members results in structural elements of great strength, whereby the members can have relatively thin wall thicknesses resulting in economy of material as well as a reduction in the overall weight of the apparatus. For example, a wall thickness of “16” is sufficient for members having a base diameter up to 10 feet, regardless of the particular material to be hoppered. A pair of angle iron bars 19 and 20 extend across the interior of the dish-shaped member 10 and have ends welded to the cylindrical base portion thereof. These bars support a third dish-shaped member 21 which is welded thereto. The member 21 is inverted and as a peripheral surface spaced from the inner wall of the dish-shaped member 10 to provide an annular path for the flow of material from the hopper to the members 10 and 11, as will be described in more detail hereinbelow. Opposed horizontally-disposed mounting plates 22 and 23 have inner sides welded to the dish-shaped member 10, such sides having arcuate shapes conforming to that of the member 10. The mounting plates are provided with corner holes for receiving tie rods by means of which the apparatus is vibrationally suspended from a storage bin. Spaced pairs of gussets 24.25 and 26.27 are welded to the under surfaces of the respective mounting plates 22 and 23 as well as to .the outer wall of the dish-shaped member 10. The aligned end surfaces of the mounting plate 23 and the underlying gussets 26 and 27 are welded to a vertical plate 30 provided with tapped holes for receiving the mounting bolts of a gyrator 31. Such gyrator preferably is a self-contained, fully-enclosed unit comprising an electric motor having a vertical shaft carrying one or more eccentrically-mounted weights. Upon energization of the motor, the weights rotate in a horizontal plane, thereby imparting vigorous vibrations to the apparatus. In the illustrated mounting of the gyrator, the vibrations imparted to the apparatus are predominantly in a direction normal to the vertical axis of the apparatus. Such vibration of the apparatus effectively fluidizes the contained material thereby promoting a positive discharge thereof through the outlet opening 17. The speed of rotation of the eccentrically-mounted weights (of the gyrator) and the amplitude of the vibrations imparted to the apparatus will vary with the size of the particular apparatus and the material to be hoppered. In general, a relatively high rotation frequency may be combined with a relatively lower vibration amplitude. I have found that a vibration frequency of 1800-3000 cycles per minute and an amplitude of 0.020-0.125 inch provides an operating range suitable for use with very large storage bins containing materials which are considered difficult to handle. For example, a gyrator frequency of 1800 r. p. m., in the case of a motor and weights capable of producing a thrust of Mi inch, will effectively fluidize contained materials such as wet sand, clay, wood chips, etc. Reference now is made to FIGURE 3, which shows the bin activator apparatus attached to a storage bin 34 having a condal bottom section 35. Welded to the bin wall are four sets of brackets, only the front sets 36 and 37 being visible in the view of FIGURE 3. Each set of the brackets includes a horizontal plate provided with a hole for receiving the associated tie rods 38 and 39 having threaded ends. Referring, specifically, to the rod 38, the upper end thereof passes through the hole formed in the horizontal plate 40 and through the vibration isolators 41 and 42, whereas the lower end passes through the hole formed in the mounting plate 22 and through the vibration isolators 43 and 44. A desired spacing between the lower end of the bin and the bin activator apparatus is obtained by means of suitable nuts applied to the rods, as will be explained hereinbelow with reference to FIGURE 4. Suffice to say, for the present, that the annular space between the upper cylindrical, portion of the dish-shaped member 10 and the wall defining the discharge opening of the hopper is closed by a resilient band 45 secured in place by two circular straps 46, 47. By suspending the bin activator apparatus from the bin, by means of the four tie rods and the associated vibration isolators, the apparatus is relatively free to vibrate in response to the vibratory thrust forces applied thereto by the eccentrically-mounted weights of the gyrator 31. The details of the mounting arrangement for vibrationally supporting the bin activator apparatus in operative position on the storage bin is best shown in the enlarged fragmentary view of FIGURE 4. This view shows one of the triangular, vertical plates of the bracket as identified by the numeral 36 and the horizontal plate 40. The upper vibration isolator 41 includes a shank portion passing through the hole formed in the plate 40 and abutting against the lower vibration isolator 42. The upper end of the tie rod 38 is secured in position by means of the nuts 50 and 51 seaed against the flat washers 52 and 53, respectively. The lower end of the tie rod secured in position by means of the bolts 54 and 55 and the washers 56 and 57, respectively positioned on opposite sides of the mounting plate 22 and seaed against the vibration isolators 43, 44. The vibration isolators, or mounts, 41-44 preferably are made of rubber. It will be apparent that four tie rods and associated vibration mounts (all similar to the tie rod and mounts just described) vibrationally support the bin activator apparatus in operative position relative to the bin. A ring 60, having an L-shaped cross-section, encircles the conical wall 35 of the bin, and is welded thereto as well as to the horizontal plate 40. The vertical wall of the ring 60 is aligned with and spaced from the end of the cylindrical section 13 of the dish-shaped member 10, and the space therebetween is closed by the band 45 made of rubber, or other suitable flexible material. This band is secured in position by the two metal straps 46 and 47, each strap being provided with conventional means, such as a turn-buckle, by means of which the band 45 may be drawn up tightly around the ring 60 and the section 13. It will now be clear that the inverted dish-shaped member 21 constitutes a baffle supporting the load of the material contained within the hopper, and that the annular space, having a vertical height (Y), constitutes the path for the flow of the material from the dish-shaped member 10 into the dish-shaped member 11. Unless the bin activator apparatus is vibrated, material may pass through the gap (Y) or may bridge across this gap. If the material passes through the gap, as a free-flowing material, it will come to rest on the surface (S). In any case, material flow from the hopper is, for all practical purposes, arrested until the apparatus is vibrated by the gyrator. The spacing (Y), between the baffle 21 and the dish-shaped member 10, will depend upon the particular material to be handled. Free-flowing materials generally require a lower baffle position than non-free-flowing materials. In fact, some materials having pronounced bridging properties may require no baffle at all, as the inherent bridge effect approaches the function provided by the baffle, that is, supporting the head load of the material above the final discharge outlet 17. However, the baffle is preferred in all cases to insure discharge of the material from the bin on a first-in, first-out basis. When the gyrator is operating, material bridged across the gap (Y) is subjected to vigorous vibrations, which action tends to unlock the material particles that normally would bridge over this gap. Once the material releases from gap (Y), it proceeds rapidly to the dish-shaped member, or sump, 11, which acts as an accumulator over the final outlet opening 17. Material will accumulate in the sump for a depth of several inches and since this material is in a state of vigorous agitation, it assumes pseudo-fluid characteristics and will, therefore, exit through the outlet opening 17 much like a liquid stream. If the tubular member 12, forming the outlet opening, were to be connected directly to the larger dish-shaped member 10, instead of the sump 11, material would have to enter the tubular member over the edge of intersection of the members 10 and 12, as over a weir, which would greatly retard outflow of the material. In a bin activator made as herein-described, the vibratory progression of the material toward the final outlet 17 is aided by the downward sloping surface of the dish-shaped member 11. The average slope of the dish-shaped members 10 and 11, taken between the points identified by the letters (M) and (N), preferably should be less than 45 degrees with the horizontal. Such slope results in a positive discharge of the material through the outlet 17 when the gyrator is operating, while, at the same time, preventing discharge of the material when the gyrator is not operating. The material discharge rate from a bin activator of the described dished-head construction is, extremely uniform, being of the order of 5 percent deviation, minute-to-minute, irrespective of the amount of material in the storage bin, or hopper. Thus, the described apparatus not only assures a positive flow of material from the storage bin, but also provides a reasonably uniform material flow rate through the outlet opening 17. The absence of material flow out of the final outlet opening, when the gyrator is not operating, eliminates the requirement for shut-off gates. Even in the case of relatively free flowing materials, the material which may pass through the annular opening (Y), by gravity flow, merely accumulates on the surface (S) of the lower dish-shaped member. Storage bins, or hoppers, generally are designed to be filled rapidly and to hold a relatively large quantity of material for subsequent discharge at a desired flow rate continuous or over spaced time periods. These requirements normally lead to a hopper design wherein the bottom portion is tapered, or funnel-shaped, terminating in a relatively small discharge opening. Such construction results in a congestion and packing of the material at the hopper discharge opening. This compacting effect is aggravated in the case of sticky materials (such as wet sand) which have a tendency to bridge across even large horizontal distances and in the case of materials consisting of irregularly-shaped pieces (such as wood chips) wherein the pieces become interlocked physically. These factors, and others, result in the disruption of material flow out of the hopper opening. In apparatus made in accordance with this invention, the hopper discharge opening purposely is made relatively large, that is, considerably larger than required for the desired material flow rate. Substantially all movement of the. material out of the main part of the hopper is arrested by the baffle member 21 and the inner surface of dish-shaped member 10. Thus, down to the level of the baffle, only a relatively slight convergence of the material takes place. The principle converging action is reserved for the zone below the baffle where the material has complete freedom of movement. Within this zone, the material moves freely because it is unhindered by the head load of the material within the hopper, because the material in this zone is subject to vigorous agitation, and, also, because the area under the baffle is never completely full. The annular gap (Y), being vigorously vibrated, results in the release of the particles through this gap more or less on an individual basis. This arrangement facilitates not only the flow of the material out of the final outlet opening, but also movement of the material down from the upper regions of the hopper. Having provided for removal of the material in the region of the discharge opening in the bottom of the hopper, there is created a decongested zone immediately above the baffle which then permits the overlying material to follow down readily. In the case of materials having a pronounced tendency to bridge, such as, for example, wet sand, wood chips, and the like, it may be necessary to apply a small amount of vibration to the side walls of the hopper, as by means of small vibrators, or gyrators 65, 66 shown in FIGURE 3. These auxiliary vibrators need apply only a very small amount of vibration to the hopper wall in order to effect a collapse of the bridging material because of the void created in the lower zone of the hopper as the material moves through the annular opening (Y) during vibration of the bin activator apparatus. Having now described the invention and principles of operation, those skilled in this art will be able to make various changes and modifications without thereby departing from the scope and spirit of the invention as recited in the following claims. I claim: 1. Apparatus for promoting the flow of material from a storage hopper having a discharge opening formed in the bottom thereof, said apparatus comprising, (a) a material-receiving member having a bottom wall defined by a plurality of concave surfaces terminating in a central outlet opening, (b) means vibrationally suspending the material-receiving member from the hopper and in spaced position to the hopper wall, and (c) means for vibrating the material-receiving member. 2. Apparatus for promoting the flow of material from a storage hopper having a discharge opening formed in the bottom thereof, said apparatus comprising, (a) a material-receiving member having a bottom wall defined by a plurality of concave surfaces terminating in a central outlet opening, (b) a baffle member rigidly secured to the material-receiving member and having a peripheral surface spaced from the inner wall of the material-receiving member, (c) means vibrationally suspending the • material-receiving member from the hopper and in spaced position to the hopper wall, and (d) means for vibrating the material-receiving member. 3. The invention as recited in claim 2, wherein the baffle member is of convex form and wherein the said means for vibrating the material-receiving member is a gyrator mechanically-coupled to the material-receiving member, said gyrator comprising an eccentrically-mounted weight rotatable by an electric motor. 4. The invention as recited in claim 3, wherein the eccentrically-mounted weight is rotatable in a plane substantially normal to the axis of the said material-receiving member. 5. The invention as recited in claim 3, wherein at least a portion of said baffle member extends into the hopper discharge opening. 6. Apparatus for promoting the flow of material from a storage hopper having a conical lower portion terminating in a hopper discharge opening, said apparatus comprising, (a) a first concave member having a central opening formed therein and a cylindrical base portion, (b) a second concave member secured to the first concave member and having a central opening formed therein, (c) a baffle member secured to the first concave member and having a peripheral surface spaced from the inner wall of the said concave member, (d) means vibrationally suspending the first concave member from the hopper, with the said cylindrical base portion spaced from the hopper wall, and (e) means for vibrating the said three . members as a unit. 7. The invention as recited in claim 6, wherein the said baffle member is an inverted dish-shaped member having a diameter substantially equal to the central opening in said first concave member. 8. The invention as recited in claim 6, wherein the said means for vibrating said three members is a gyrator mechanically-coupled to the said first member, said gyrator comprising an eccentrically-mounted weight rotatable upon energization of an electric motor. 9. The invention as recited in claim 8, wherein said weight is rotatable in a plane substantially normal to the axis of said first concave member. 10. The invention as recited in claim 6, including a flexible band closing the space between the walls of the hopper and the said cylindrical portion of said first concave member. 11. The invention as recited in claim 6, wherein a straight line drawn from a point on the maximum diameter of the said first member to the wall defining the central opening in said second member has a slope of less than 45 degrees with the horizontal. 12. Bin activator apparatus for use with a storage hopper having a tapered bottom wall terminating in a discharge opening of predetermined size, said apparatus comprising, (a) a first concave member having a central opening formed therein and a cylindrical section having an inside diameter greater than the hopper discharge opening, (b) a second concave member having a central opening formed therein and a cylindrical portion secured to and extending from said first member, (c) a third concave member having a diameter less than that of the hopper discharge opening, (d) spaced supporting members disposed in and secured to the said first member, (e) means rigidly securing the said third member to the supporting members, with said third member being reversely disposed to and concentric with said first member, and (f) a gyrator mechanically coupled to the said first member, said gyrator comprising an eccentric weight rotatable by an electric motor thereby to impart vigorous vibrations to the apparatus. 13. The invention as recited in claim 12, wherein a straight line drawn from a point on the maximum diameter of said first member to a point on the wall defining the central opening in said second mefhber has a slope of less than 45 degrees with the horizontal. 14. The invention as recited in claim 12, wherein the said third concave member has a base diameter substantially equal to that of the central hole formed in said second concave member. 15. The invention as recited in claim 12, including a tubular member secured to and extending from said second concave member, said tubular member being concentric with the central opening formed in said second concave member. 16. The invention as recited in claim 12, including means for suspending the apparatus from a sto